GATE OPENER BRANDS
|
 DoorKing Gate Openers & Doorking Gate Operators
|
| DoorKing, Inc. has become
a leader in the access control industry by offering customers innovative
products and by maintaining one of the best customer
service
departments in the industry. They don't just offer products - They offer
solutions - complete with system design, technical support and
training.
DoorKing was established in 1948 and is one of the
countries leading manufacturers of telephone entry systems, vehicular gate
operators, parking control
products and access control systems in
the country. DoorKing was the first company to use microprocessors and
electronic magnetic limits in their
vehicular gate and parking
control operator designs. Fail-safe entrapment prevention system was
incorporated into vehicular gate operators decades
before
entrapment protection became a part of the safety standard for vehicular
gate operators. DoorKing gate operators have long been considered the
safest vehicular gate operators on the
market. |
 |
Doorking 6002 Residential Swing Gate Operator Actuator
Maximum
gate width 14-feet. (Assumes gate swings level and is in good condition with
properly adjusted hardware.
Other external factors may affect the performance
of the gate operator. )
Swings gate 90 degrees in approximately
16-seconds.
Actuator operates at 24 Volts DC power.
Class I
applications.
Compliant with UL 325 and 991. ETL
Listed.
Click Here For More Info |
 |
Doorking 6003 Residential Swing Gate Opener Actuator
Maximum gate width 10-feet. (Assumes gate swings level and is in good condition with properly adjusted
hardware.
Swings gate 90 degrees in approximately 16-seconds.
Actuator operates at 24 Volts DC power.
Class I applications.
Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional
secondary entrapment prevention devices need to be installed with this gate operator. Your professional DKS
system installer can provide you with more details on these devices and on current industry safety standards.)
Click Here For More Info |
 |
Doorking 6004 Column Mount Swing Gate Operator
Maximum gate width 8-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )
Maximum gate weight 300 lbs.
Operates at 24 Volts DC power.
Class I applications.
Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions (operator only): 5.13"D x 5.25"H x 16"L.
Actuator main arm: 17.5" in length, with a total Height of 6.5" including the arm drive bolt.
Dimensions (120 Volt deluxe control box): 14.5"W x 24"H x 4.25"D
Dimensions (120 Volt standard control box): 12.5"W x 16.5"H x 4.25"D
Dimensions (Solar control box): 13"W x 21"H x 8"D
Click Here For More Info |
 |
Doorking 6500 Vehicular Swing Gate Operator
Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP).
Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP). (*Assumes gate swings level and is in good condition with properly adjusted hardware.
Swings gate 90 degrees in approximately 12-14 seconds.
1/2 or 1 HP continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve
115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991.. (Note: To be compliant with UL 325 and industry safety
guidelines, additional secondary entrapment prevention devices are required to be installed
with this gate operator
Click Here For More Info |
|
Doorking 6050 Residential Swing Gate Opener
Maximum gate width
10-feet.
Maximum gate weight 400 pounds*. (*Assumes gate swings
level and is in good condition with properly adjusted hardware.
Other external factors
may affect the performance of the
gate operator).
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP
limited-duty motor.
115 VAC, 4.3 Amps.
Class I applications.
Compliant
with UL 325 and 991.
Click Here For More Info - Primary Unit
Click Here For More Info - Secondary Unit |
|
Doorking 6100 Residential / Light Commercial Gate Opener
Maximum gate width
14-feet.
Maximum gate weight 500 pounds*. (*Assumes gate swings
level and is in good condition with properly adjusted hardware.
Other external factors
may affect the performance of the
gate operator.)
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP
continuous-duty motor.
115 VAC, 5.4 Amps.
Class I and Class II
applications.
Compliant with UL 325 and 991. ETL
listed.
Click Here For More Info - Primary Unit
Click Here For More Info - Secondary Unit
Click Here For More Info - with DC Convinience Package |
|
Doorking 6300 1/2HP Commercial Swing Gate Opener
Maximum
gate width 18-feet.
Maximum gate weight 700 pounds*. (*Assumes
gate swings level and is in good condition with properly adjusted
hardware.
Other external factors may affect the performance of the gate
operator.)
Swings gate 90 degrees in approximately 15-seconds.
1/2 HP
continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt
units use a step-down power
transformer to achieve 115 volt operating
voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991.
ETL
Listed.
Click Here For More Info - Primary Unit
Click Here For More Info - Secondary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 6300 1HP Commercial Swing Gate Operator
Maximum
gate width 22-feet.
Maximum gate weight 800 pounds*. (*Assumes gate swings
level and is in good condition with properly adjusted hardware.
Other
external factors may affect the performance of the gate operator.)
Swings
gate 90 degrees in approximately 15-seconds.
1 HP continuous-duty
motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a
step-down power
transformer to achieve 115 volt operating voltage.)
Class
I, II, III and IV applications.
Compliant with UL 325 and 991.
ETL
listed.
Click Here For More Info - Primary Unit
Click Here For More Info - Secondary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 6400 Underground Swing Gate Residential Opener
Maximum
gate width 10-feet.
Maximum gate weight 300 pounds*. (*Assumes
gate swings level and is in good condition with
properly adjusted hardware.
Other external factors may affect the performance of the gate
operator. )
Swings gate 90 degrees in approximately 16-seconds.
Actuator
operates at 24 Volts DC power.
Class I applications.
Compliant with UL 325
and 991. ETL
Listed.
Click Here For More Info - Primary Unit
Click Here For More Info - Secondary Unit |
|
Doorking 9000 Vehicular Slide Gate Operator
- Maximum gate width 35-ft.
- Maximum gate weight 1000 pounds* (1/2 HP) or 1500 pounds* (1 HP). (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- 1/2 or 1 HP continuous-duty motor
- 115, 230*, 208*, 460* VAC. (*230, 208, and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications
- Compliant with UL 325 and 991, ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions: 16.75"W x 28"H x 19"D
Click Here For More Info |
|
Doorking 9050 Heavy Residential Light Commercial Gate Operator
Maximum
gate length 16-feet.
Maximum gate weight 300 pounds*. (*Assumes
gate is on level ground, in good condition
with properly adjusted
hardware.
Other external factors may affect the performance of the gate
operator.)
1/2 HP limited-duty motor.
115 VAC, 4.3 Amps.
Class I
applications.
Compliant with UL 325 and 991.
ETL
Listed.
Click Here For More Info |
|
Doorking 9070 Heavy Residential Light Commercial Sliding Gate Openers
Maximum
gate length 22-feet.
Maximum gate weight 500 pounds*. (*Assumes
gate is on level ground, in good condition
with properly adjusted hardware.
Other external factors may affect the performance of the gate
operator.)
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Operator is
shipped with chain brackets and 20-feet of #41 chain.
Class I and Class II
applications.
Compliant with UL 325 and 991.
ETL listed.
Click Here For More Info |
|
Doorking 9100 Commercial Sliding Gate Opener
Maximum
gate length 30-feet.
Maximum gate weight 1000 pounds*. (*Assumes
gate is on level ground, in good condition with properly adjusted hardware.
Other external factors may affect the performance of the gate
operator.)
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Operator is
shipped with chain brackets and 20-feet of #41 chain.
Class I, II,
III and IV applications.
Compliant with UL 325 and 991.
ETL
Listed.
Click Here For More Info |
|
Doorking 9150, 1/2 Slide Gate Opener
Maximum
gate length 30-feet.
Maximum gate weight 1000 pounds*. (*Assumes gate is on
level ground, in good condition with properly adjusted hardware.
Other
external factors may affect the performance of the gate operator. If
DC Convenience Open option is installed, maximum
gate weight is 1300 pounds.
Other external factors may affect the performance of the gate
operator.)
1/2 HP continuous-duty motor.
115, 230*, 460* VAC
(*230 and 460 volt units use a step-down power transformer to
achieve 115 volt operating voltage.)
Operator is shipped with chain brackets
and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991.
ETL
listed.
Click Here For More Info - Primary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 9150, 1hp Slide Gate Operator
Maximum
gate length 45-feet.
Maximum gate weight 1500 pounds*. (*Assumes gate is on
level ground, in good condition with properly adjusted hardware.
Other external factors may affect the performance of the gate
operator. If DC Convenience Open option is installed,
maximum
gate weight is 1300 pounds. Other external factors may
affect the performance of the gate operator.)
1 HP continuous-duty
motor.
115, 230*, 460* VAC (*230 and 460 volt units use a
step-down power transformer to achieve 115 volt operating voltage.)
Operator
is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and
IV applications.
Compliant with UL 325 and 991. ETL
listed.
Click Here For More Info - Primary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 9310, 1/2hp Heavy Duty Slide Openers
Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open
option is installed, maximum gate weight is 800 pounds. Other external factors may affect the performance of the gate operator.)
10:1 gear reduction running in a continuous oil bath.
1/2 HP continuous-duty motor.
115, 208, 230, 460 VAC*. (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed.
Click Here For More Info - Primary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 9310, 1hp Heavy Duty Slide Operator
Maximum
gate length 45-feet.
Maximum gate weight 1500 pounds*. (*Assumes gate is on
level ground, in good condition with properly
adjusted hardware.
If DC Convenience Open option is installed, maximum gate weight is
1300 pounds.
Other external factors may affect the performance of the
gate operator.)
10:1 gear reduction running in a continuous oil bath.
1 HP
continuous-duty motor.
115, 230 VAC single-phase, 208, 230, 460 VAC
three-phase.
Operator is shipped with chain brackets and 20-feet of #40
chain.
Class I, II, III and IV applications.
Compliant with UL
325 and 991. ETL
Listed.
Click Here For More Info - Primary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 9210 High Security Gate Opener
Maximum
gate length 100-feet.
Maximum gate weight 3000 pounds*. (*Assumes gate is on
level ground, in good condition with properly adjusted hardware.
Other
external factors may affect the performance of the gate operator.)
40:1 gear
reduction running in a continuous oil bath.
1 HP continuous-duty
motor.
115, 208, 230 VAC single-phase, 208, 230, 460 VAC
three-phase.
Operator is shipped with chain brackets and 20-feet of #50
chain.
Class III and IV applications only.
Compliant with UL 325 and 991. ETL
Listed.
Click Here For More Info - 115V, 208V, 230V - Single Phase
Click Here For More Info - 208V, 230V - 3 Phase |
|
Doorking 9220
Maximum
gate length 100-feet.
Maximum gate weight 2000 pounds*. (*Assumes gate is on
level ground, in good condition with properly adjusted hardware.
Other
external factors may affect the performance of the gate operator.)
Adjustable
solid state speed control, 1/2 to 2 Ft./sec.
Slow start / slow stop
function.
40:1 gear reduction running in a continuous oil bath.
1 HP
continuous-duty motor.
208, 230 VAC single or three-phase.
Operator is
shipped with chain brackets and 20-feet of #50 chain.
Class III and IV
applications only.
Compliant with UL 325 and 991 - but not yet
listed.
Click Here For More Info |
|
Doorking 9230 High Security Gate Operator
Maximum
gate length 100-feet.
Maximum gate weight 5000 pounds*. (*Assumes gate is on
level ground, in good condition with properly adjusted hardware.
Other
external factors may affect the performance of the gate operator.)
Adjustable
solid state speed control, 1/2 to 2 Ft./sec.
Slow start / slow stop
function.
40:1 gear reduction running in a continuous oil bath.
3 HP
continuous-duty motor.
208, 230 VAC three-phase.
Operator is shipped with
chain brackets and 20-feet of #60 chain.
Class III and IV applications
only.
Compliant with UL 325 and 991 - but not yet
listed.
Click Here For More Info |
|
Doorking 9530
Maximum
gate length 100-feet.
Maximum gate weight 5000 pounds*. (*Assumes
gate is on level ground, in good condition with
properly adjusted hardware.
Other external factors may affect the performance of the gate
operator.)
Adjustable speed: 1/2 - 2 Ft./sec.
6 Ft./sec panic close
feature.
10:1 gear reduction running in a continuous oil bath.
Self
adjusting disc brake with manual release.
3 HP continuous-duty motor.
208,
230 VAC three-phase only.
Operator is shipped with chain brackets and 20-feet
of #60 chain.
Class III and IV applications only.
Compliant with UL 325 and 991 - but not yet
listed.
Click Here For More Info |
|
Doorking 9550 Maxinum Strength Slide Gate Opener
Maximum
gate length 160-feet.
Maximum gate weight 10,000 pounds*.
(*Assumes gate is on level ground, in good condition
with
properly adjusted hardware. Other external factors may
affect the performance of the gate operator.)
Adjustable gate speed: 1/2 - 4
Ft./sec.
10:1 gear reduction running in a continuous oil bath.
Self
adjusting disc brake with manual release.
5 HP continuous-duty motor.
208,
230 VAC three-phase only.
Operator is shipped with chain brackets and 20-feet
of #60 chain.
Class III and IV applications only.
Compliant with UL 325
and 991 - but not yet
listed.
Click Here For More Info |
|
Doorking 1601 Barrier Gate Arm Opener
1/2 HP
continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt
units use a step-down power transformer to achieve 115 volt operating
voltage.)
40:1 gear-box running in a continuous oil bath.
Arm rotates 90°
in approximately 1.5 seconds.
Class II, III and IV applications.
Compliant
with UL 325 and 991. ETL
Listed.
Click Here For More Info - Primary Unit
Click Here For More Info - with DC Convinience Packag
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 1602 Heavy Duty Barrier Gate Operator
1 HP continuous-duty motor.
60:1
gear-box running in a continuous oil bath.
115, 230*, 460* VAC.
(*230 and 460 volt units use a step-down power transformer to
achieve 115 volt operating voltage.)
Arm rotates 90° in approximately 5.5
seconds.
Class III and IV applications.
Compliant with UL 325 and 991.
ETL
Listed.
Click Here For More Info - Primary Unit
Click Here For More Info - with DC Convinience Package
Click Here For More Info - 230V / 460V
Click Here For More Info - 230V / 460V with DC Convinience Package |
|
Doorking 1603 Barrier Operator with Spikes
Designed to link mechanically with the automated spikes
1/2 HP 115, 230, 460 VAC (DC powered convenience open option available)
Maintenance free magnetic limits
Up input memory buffer
Multiple UP command options
Ports for plug-in loop detectors
2 Convenience outlets
Automatic sequencing
14-foot aluminum or wood arm
Click Here For More Info |
|
|
