|
Doorking 9310-080 1/2 HP Opener Heavy Residenital Commerical Gate Operator
Doorking 9310-081/115V 1/2HP PACKAGE Residential Commercial Gate Operator
Advanced Features
Power Start circuit (1/2 HP only).
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered convenience open (optional).
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
Doorking 9310 1/2 HP
Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open option is
installed, maximum gate weight is 800 pounds. Other external factors may affect the performance of the gate operator.)
10:1 gear reduction running in a continuous oil bath.
115, 208, 230, 460 VAC*. (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is
required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry
safety standards.)
Dimensions: 21.5"W x 27.5"H x 16.5"D
Doorking 9310 1 HP
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open option is
installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
10:1 gear reduction running in a continuous oil bath.
1 HP continuous-duty motor.
115, 230 VAC single-phase, 208, 230, 460 VAC three-phase.
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is
required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry
safety standards.)
Dimensions: 28.5"W x 27.5"H x 16.5"D
OPTIONS AVAILABLE WITH THIS OPERATOR
DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.
|
