Doorking 6100-082 with 115V & 1/2HP CONVINIENCE PACKAGE Residential Commercial Swing Gate Opener
|
|
 |
Doorking 6100 operators are designed to operate vehicular swing
gates in residential and commercial applications. These operators are
designed so that they can be either pad or post mounted without any costly
and time consuming field modifications. You need to specify which
mounting method when ordering. The unique design of these operators
allows the gate arm to be attached to the bottom rail of the gate. This
eliminates the need for any brackets to be welded to the face of the gate and
creates an aesthetically pleasing installation. The Doorking 6100 can be equipped
with a factory installed DC Convenience Open option which will automatically
open the gate in the event of a power outage.
CALL FOR PRICE
 Manual
Spec Sheet English
Spec Sheet Spanish
Quick Start
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
Doorking 6100-082 115V 1/2HP CONVINIENCE PACKAGE Commercial Swing Gate Opener -- (( Not longer available click to see compatibility ))
Doorking Pad Mount Kit 2600-671 ( 6050-6100 ) (Old Part # 2600-691)
Doorking Post Mount Kit with Accessories for 6050 and 6100 (Old Part # 260-693)
Self-adjusting, no maintenance magnetic limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention
system.
Ports for plug-in loop detectors.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (Option on 6100 only).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
Doorking 6100
Maximum gate width 14-feet.
Maximum gate weight 500 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external
factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Class I and Class II applications.
Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment
prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on
these devices and on current industry safety standards.)
Dimensions (operator only): 13.25"W x 12"H* x 23"D (28"D with convenience open option) (* Height of operator only. Actual height above ground
is determined by which mounting method is used)
OPTIONS AVAILABLE WITH THESE OPERATORS
Bi-parting gate connection cable (6050 secondary operator is shipped with 30-feet of cable; 6100 secondary operator
is shipped with 40-feet of cable.)
Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.
|
