Doorking 6300 080 / 115V 1/2HP Residential Commercial Industrial Swing Gate Opener
|
|
 |
Door king Gate Operators Model 6300 with 1/2 HP Motor
Maximum gate width 18-feet.
Maximum gate weight 700 pounds
DKS 6300 series are designed to operate vehicular swing gates in residential, commercial
and industrial applications. DKS 6300 are designed so that they can be either pad or post
mounted without any costly and time consuming field modifications.
You need to specify which
mounting method when ordering. The unique design of these allow the gate arm to be
attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the
face of the gate and creates an aesthetically pleasing installation. DKS 6300 can be equipped
with a factory installed DC Convenience Open option which will automatically open the gate in the
event of a power outage.
CALL FOR PRICE
 Spec Sheet English
Spec Sheet Spanish
Manual
Quick Start
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
Doorking 6300 080 1/2 HP Swing Opener Commercial Industrial Gate Operator
Doorking 6300 081 Master Slave 1/2 HP Operator Residential Swing Gate Opener
Doorking 6300 082/115 1/2HP CONVINIENCE PACKAGE Commercial Swing Gate Opener
Doorking Post Mount Kit with Accessories for 6300
Doorking Pad Mount Kit for 6300 Gate Operators Only (Old Part # 2600-244)
ADVANCED FEATURES
Self-adjusting, no maintenance magnetic limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Two convenience outlets.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (optional).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
SPECIFICATIONS Model 6300 with 1/2 HP Motor
Maximum gate width 18-feet.
Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the
performance of the gate operator.)
1/2 HP continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices
may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry
safety standards.)
Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
OPTIONS AVAILABLE WITH THIS OPERATOR
Master / slave connection cable (slave operator is shipped with 50-feet of cable).
Post or pad mount - specify which.
DC powered convenience open.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.
|
