Power Master Swing Gate Operators, PowerMaster Swing Gate Openers

• Cover: UV Protected Polyethylene (Clam Shell Design)
• Gearbox: 750:1
• Motor: 1/2 HP, 500 Watt, 24VDC
• Power input 120 VAC
• Travel Speed: 90 Degrees in 15 seconds (approx.)
• Gate Capacity: 800 lbs, 18 feet commercial capacity
• Arm attachment Height: 17” from operator base
• Dimensions: 18” High, 18.5” Wide, 23.5” Deep

PowerMaster RSW 2000 Swing Gate Operator

• Power requirements: 115 Volts, 1 Phase
• Class 2 low voltage control circuit
• Available horse power: 1/2 HP
• Maximum gate weight: 350 LBS.
• Maximum cycles per hour: 12 CPH
• Maximum gate width: 12 feet
• Gate speed: 10 seconds from open to close.
• U/L 325 listed for use in Class I through IV applications.
  
  No longer available, replacement by MSW, please call us for more info!
  

PowerMaster MSW 2000 Swing Gate Operator

• Power requirements: 115 Volts, 1 phase.
• Class 2 low voltage control circuit.
• Available horse power: 1/2 HP.
• Maximum gate weight: 800 LBS.
• Maximum cycles per hour: 24 CPH.
• Maximum gate width: 16 feet.
• Gate speed: 12 seconds from open to close.
• UL 325 Listed for use in Class I through IV application.

Regular Price: $1,595.00
Our Price: $1,025.00

Click Here For More Information

Power Master CSWC 2004 Commercial Swing Gate Opener

PowerMaster CSWC 2000 Swing Gate Operator

• Power requirements: 115 Volts, 1 Phase
• Class 2 low voltage control circuit
• Available horse power: 1/2 - 1 HP
• Maximum gate weight: 1500 LBS.
• Maximum cycles per hour: 35 CPH
• Maximum gate width: 25 feet
• Gate speed: 13 seconds from open to close.
• U/L 325 listed for use in Class I through IV applications.

PowerMaster CSWI 2000 Swing Gate Operator

• Power requirements: 115 Volts, 1 phase
• Class 2 low voltage control circuit
• Available horse power: 1/2 - 2hp
• Maximum gate weight: 1800 LBS
• Maximum cycles per hour: 45 CPH
• Maximum gate width: 30 feet
• Gate speed: 13 seconds from open to close
• UL 325 Listed for use in Class I through IV application

Click Here for More Information 1/2hp
Click Here for More Informaiton 3/4hp
Click Here for More Information 1hp
Click Here for More Informaiton 1 1/2hp
Click Here for More Information 2hp

Powermaster Standby power supply model SPS-1000

Designed to provide 120 VAC power to any powermaster operator with a ½ HP PSC motor, when the main power source fails.
All connected accessories and safety functions are powered by the SPS, allowing for normal operation during extended outages and maintaining the operators UL325 and 991 compliance.

Click Here for More Information


Regular Price: $ 1,100.00
Our Price: $ 975.00