Doorking 9150 083 with 230V, Doorking 9150 089 with 460 & 1HP, DC CONVINIENCE PACKAGE Industrial Gate Operator
|
|
 |
Door king Slide Gate Operators 9150 with 1/2 HP Motor
Maximum gate length 30-feet.
Maximum gate weight 1000 pounds
Doorking Sliding Gate Openers 9150 with 1 HP Motor
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds
DKS 9150 are designed to operate vehicular slide gates in residential, commercial and industrial
applications. DKS 9150 are designed so that they can easily be mounted in the front, center or rear of
the gate without any costly and time consuming field modifications. In addition, it can be pad or
post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC
Convenience Open option which will automatically open the gate in the event of a power outage. CALL FOR PRICE
 English Spec Sheet
Spanish Spec Sheet
Manual
 Quick Start
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
Doorking 9150 083 230V 1HP CONVINIENCE PACKAGE Industrial Gate Operator
Doorking 9150 089 460 1HP CONVINIENCE PACKAGE Industrial Gate Operator
ADVANCED FEATURES
Self-adjusting, no maintenance magnetic limits.
Partial-open feature.
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered Convenience Open (Optional).
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
Doorking 9150 with 1 HP Motor
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external
factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds.
Other external factors may affect the performance of the gate operator.)
1 HP continuous-duty motor.
115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment
prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details
on these devices and on current industry safety standards.)
Dimensions: 15"W x 24"H x 16.5"D
OPTIONS AVAILABLE WITH THESE OPERATORS
DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Base plate to post mount this operator (does not include posts).
Surge suppressors.
|
