Power Master Slide Gate Openers, PowerMaster Sliding Gate Openers

Rated at 1/2 horse poser, 115VAC., 1Ø. Operator shall be fully enclosed in a heavy gauge steel, weatherproof cabinet, primed and painted to resist corrosion. For Use on Residential Slide Gates (Up to 14' Wide, Max. Weight 350 lbs.)NOTE: mounting post not included

Click Here For More Info

Regular Price: $995.00
Our Price: $695.00

TECHNICAL SPECIFICATIONS Power requirements: 115/230V, 1 phase 230/460V, 3 phase. Class 2 low voltage control circuit. Available horse power: 1/2 to 1-1/2 HP. Maximum gate weight: 1800 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. UL 325 Listed for use in Class I through IV application. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $2,900.00
Our Price: $2,603.13

Solid state control board with diagnostic LEDs to indicate all input and output functions. Three button control station on circuit board to facilitate installation and maintenance. External control, input terminalconnections for: Radio Receivers, Push Button Control Station, Key Switches,Loop Detectors, Card Key Readers, Telephone Entry Systems, etc. Timer to close with 0-60 sec. Adjustment standard. Longer timer available upon request. Maximum run timer for equipment protection (self adjusting) Master/Slave option with dedicated terminal connection provided. Easy Left/Right changeover

Click Here For More Info

Regular Price: $1,600.00
Our Price: $1,295.00

Model SGI 2000 Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.) High Starting Torque Motor Full Overload Protections 24 VAC Control Circuit Heavy Duty, Full Voltage, Reversing Contactor 3 Button NEMA 1 control Station Included On/Off Power Switch Left/Right Direction Switch

Click Here For More Info

Regular Price: $3,185.00
Our Price: $2,035.33

Model SG 2000 Slide Gate Operator TECHNICAL SPECIFICATIONS Power requirements: 115 Volts, 1 PHASE Class 2 low voltage control circuit. Available horse power: 1/2 HP. Maximum gate weight: 1500 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. U/L 325 listed for use in Class I through IV applications. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $2,000.00
Our Price: $1,769.47

Model SGI 2004 Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.) High Starting Torque Motor Full Overload Protections 24 VAC Control Circuit Heavy Duty, Full Voltage, Reversing Contactor 3 Button NEMA 1 control Station Included On/Off Power Switch Left/Right Direction Switch

Click Here For More Info

Regular Price: $2,945.00
Our Price: $2,725.63

TECHNICAL SPECIFICATIONS Power requirements: 115/230V, 1 phase 230/460V, 3 phase. Class 2 low voltage control circuit. Available horse power: 1/2 to 1-1/2 HP. Maximum gate weight: 1800 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. UL 325 Listed for use in Class I through IV application. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $2,799.00
Our Price: $2,480.63

Model SGI 2004 Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.) High Starting Torque Motor Full Overload Protections 24 VAC Control Circuit Heavy Duty, Full Voltage, Reversing Contactor 3 Button NEMA 1 control Station Included On/Off Power Switch Left/Right Direction Switch

Click Here For More Info

Regular Price: $3,046.00
Our Price: $2,725.63

TECHNICAL SPECIFICATIONS Power requirements: 115/230V, 1 phase 230/460V, 3 phase. Class 2 low voltage control circuit. Available horse power: 1/2 to 1-1/2 HP. Maximum gate weight: 1800 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. UL 325 Listed for use in Class I through IV application. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $2,699.00
Our Price: $2,603.13

Model SGI 2004 Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.) High Starting Torque Motor Full Overload Protections 24 VAC Control Circuit Heavy Duty, Full Voltage, Reversing Contactor 3 Button NEMA 1 control Station Included On/Off Power Switch Left/Right Direction Switch

Click Here For More Info

Regular Price: $3,205.00
Our Price: $2,848.13

TECHNICAL SPECIFICATIONS Power requirements: 115/230V, 1 phase 230/460V, 3 phase. Class 2 low voltage control circuit. Available horse power: 1/2 to 1-1/2 HP. Maximum gate weight: 1800 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. UL 325 Listed for use in Class I through IV application. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $2,999.00
Our Price: $2,795.00

Model SGI 2004 Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.) High Starting Torque Motor Full Overload Protections 24 VAC Control Circuit Heavy Duty, Full Voltage, Reversing Contactor 3 Button NEMA 1 control Station Included On/Off Power Switch Left/Right Direction Switch

Click Here For More Info

Regular Price: $3,367.00
Our Price: $3,338.13

TECHNICAL SPECIFICATIONS Power requirements: 2HP 230-460 3 Phase Class 2 low voltage control circuit. Horse Power:2HP. Maximum gate weight: 1800 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. UL 325 Listed for use in Class I through IV application. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $3,249.00
Our Price: $2,863.44

Model SGI 2004 Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.) High Starting Torque Motor Full Overload Protections 24 VAC Control Circuit Heavy Duty, Full Voltage, Reversing Contactor 3 Button NEMA 1 control Station Included On/Off Power Switch Left/Right Direction Switch

Click Here For More Info

Regular Price: $3,725.75
Our Price: $3,495.00

TECHNICAL SPECIFICATIONS Power requirements: 460V, 3 phase. Class 2 low voltage control circuit. Horse power: 3HP. Maximum gate weight: 1800 LBS. Maximum cycles per hour: 30 CPH. Maximum gate width: 50 feet. Gate speed: 11 inches per second. UL 325 Listed for use in Class I through IV application. Shipping weight: approx. 235 LBS.

Click Here For More Info

Regular Price: $9,500.00
Our Price: $8,599.00

The DCSG operates vehicular slide gates for high trac application.
Vehicular Slide Gate Operator DCSG It is ideal for custom homes, apartments, self storage and other commercial properties.

Click Here For More Info

Regular Price: $
Our Price: $

The DSG operates vehicular slide gates for commercial and
Vehicular Slide Gate Operator DSG industrial applications.

Click Here For More Info

Regular Price: $ 2,550.00
Our Price: $ 2,419.38

Powermaster Standby power supply model SPS-1000

Designed to provide 120 VAC power to any powermaster operator with a ½ HP PSC motor, when the main power source fails.
All connected accessories and safety functions are powered by the SPS, allowing for normal operation during extended outages and maintaining the operators UL325 and 991 compliance.

Click Here for More Information


Regular Price: $ 1,100.00
Our Price: $ 975.00