Doorking 6300 082 with 115V & 1/2HP CONVINIENCE PACKAGE, Doorking Residential Swing Gate Opener
		Doorking 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications.   These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.   You need to specify which mounting method when ordering.   The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate.    This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.   These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. CALL FOR PRICE  Spec Sheet English  Spec Sheet Spanish  Manual  Quick Start Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here

Doorking 6300-082/115 1/2HP CONVINIENCE PACKAGE Commercial Swing Gate Opener -- (( Not longer available click to see compatibility ))
 

Doorking 6300-080 1/2 HP Swing Opener Commercial Industrial Gate Operator
 

Doorking 6300-081 Master Slave 1/2 HP Operator Residential Swing Gate Opener
 

Doorking 6300-088 1/2HP 230V Swing Opener Commercial Gate Operator
 

Doorking 6300-089 /230 1/2HP Swing Gate Operator
 

Doorking 6300-093 /460 1/2HP Swing Gate Operator
 

Doorking Post Mount Kit with Accessories for 6300

Doorking Pad Mount Kit for 6300 Gate Operators Only (Old Part # 2600-244) 

ADVANCED FEATURES
Self-adjusting, no maintenance magnetic limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Two convenience outlets.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (optional).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

SPECIFICATIONS          Model 6300 with 1/2 HP Motor
Maximum gate width 18-feet.
Maximum gate weight 700 pounds*.   (*Assumes gate swings level and is in good condition with properly adjusted hardware.   Other external factors may affect the
performance of the gate operator.)
1/2 HP continuous-duty motor.
115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices
may need to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry
safety standards.)
Dimensions (operator only): 13.25"W x 12"H* x 28"D   (* Height of operator only.   Actual height above ground is determined by which mounting method is used)

OPTIONS AVAILABLE WITH THIS OPERATOR
Master / slave connection cable (slave operator is shipped with 50-feet of cable).
Post or pad mount - specify which.
DC powered convenience open.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.