Platinum Gate Openers

The “New Generation” ACTP715 of the gate industry, the Platinum Access Systems  model of gate operators is the first choice for Residential/Commercial applications. All of our products are carefully inspected and mechanically tested to provide unsurpassed  innovations ensure that any Platinum Access Systems model will meet the need of most type of  gated entrances. All backed by the safety and reliability of the most advanced control board in the  industry.

• GOC-4000 Control board with input/output LED’s
  
• Electronic reversing sensor built into control board
  
• Adjustable timer from 0-60 seconds.
  
• Super quiet operation
• Soft start and Soft Stop
• Precision limit switches
• Surge Protection
  
• Self-syncing
• Alarm reset button
• Charcoal Gray- Powder Coated control board box

Click Here For More Info

The BLSL840 with its ultra-quiet high torque brushless DC motor is the first choice for light slide gate applications. This full features state  of the art operator uses a 120/220VAC single phase main power source and utilizes a high efficient switching power supply to supply the  proper voltage for operation.The operator is equipped with a built-in 24VDC battery backup system and it can operate with a direct solar panel  connection as well. This operator is designed to operate in any climate; it does not require a gearbox or a battery heater to operate in -20°F.  Temperature between -20°F and -40°F require a battery heater and below -40°F it requires a gearbox heater as well. The optional chain routing under the sprocket for extra chain clearance for non-raised pad mounting These unique engineering innovations backed by the safety and reliability of the most advanced control board in the industry ensure a smooth operation for any Platinum Access Systems operator.

• Continuous duty
• Capacity 800Lbs./40ft
• Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Slide gate works on  slope without coasting
• Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
• Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is sufficient, saving battery life
• Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
• High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
• Solid State Motor Drivers – For quiet and long lasting operation

Click Here For More Info

The BLSL2250 with its ultra-quiet high torque brushless DC motor is the first choice for medium slide gate applications. This full features state of the art operator uses a 120/220VAC single phase main power source and utilizes a high efficient switching power supply to supply the proper voltage for operation. The operator is equipped with a built-in 24VDC battery backup system and it can operate with a direct solar panel connection as well. This operator is designed to operate in any climate; it does not require a gearbox or a battery heater to operate in -20°F. Temperature between -20°F and -40°F require a battery heater and below -40°F it requires a gearbox heater as well. The optional chain routing under the sprocket for extra chain clearance for non-raised pad mounting These unique engineering innovations backed by the safety and reliability of the most advanced control board in the industry ensure a smooth  operation for any Platinum Access Systems operator.

• Continuous duty
  
• Capacity 2200Lbs./50ft
• Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Slide gate works on slope without coasting
• Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
• Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is  sufficient, saving battery life
• Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
  
• High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
• Solid State Motor Drivers – For quiet and long lasting operation

Click Here For More Info

The BLSL3060 with its ultra-quiet high torque brushless DC motor is the first choice for heavy slide gate applications. This full features state of the art operator uses a 120/220VAC single phase main power source and utilizes a high efficient switching power supply to supply the proper voltage for operation.The operator is equipped with a built-in 24VDC battery backup system and it can operate with a direct solar panel connection as well. This operator is designed to operate in any climate; it does not require a gearbox or a battery heater to operate in -20°F. Temperature between -20°F and -40°F require a battery heater and below -40°F it requires a gearbox heater as well.The optional chain routing under the sprocket for extra chain clearance for non-raised pad mounting. These unique engineering innovations backed by the safety and reliability of the most advanced control board in the industry ensure a smooth operation for any Platinum Access Systems operator.

• Continuous duty
• Capacity 3000Lbs./60ft
• Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Slide gate works on  slope without coasting
• Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
• Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is 
  sufficient, saving battery life
• Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
• High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
• Solid State Motor Drivers – For quiet and long lasting operation

Click Here For More Info

The BLSW814 with its ultra-quiet high torque brushless DC motor is the first choice for light swing gate applications. This full features state of the art operator uses a 120/220VAC single phase main power source and utilizes a high efficient switching power supply to supply the proper voltage for operation.The operator is equipped with a built-in 24VDC battery backup system and it can operate with a direct solar panel connection as well. This operator is designed to operate in any climate; it does not require a gearbox or a battery heater to operate in -20°F. Temperature between -20°F and -40°F require a battery heater and below -40°F it requires a gearbox heater as well. These unique engineering innovations backed by the safety and reliability of the most advanced control board in the industry ensure a smooth operation for any Platinum Access Systems operator.

• Continuous duty
• Capacity 800Lbs./14ft
• Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Swing gate works on slope without coasting
• Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
• Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is sufficient, saving battery life
• Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
• High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
• Solid State Motor Drivers – For quiet and long lasting operation

Click Here For More Info

The BLSW1016 with its ultra-quiet high torque brushless DC motor is the first choice for medium swing gate applications. This full features state of the art operator uses a 120/220VAC single phase main power source and utilizes a high efficient switching power supply to supply the proper voltage for operation.The operator is equipped with a built-in 24VDC battery backup system and it can operate with a direct solar panel connection as well. This operator is designed to operate in any climate; it does not require a gearbox or a battery heater to operate in -20°F. Temperature between -20°F and -40°F require a battery heater and below -40°F it requires a gearbox heater as well. These unique engineering innovations backed by the safety and reliability of the most advanced control board in the industry ensure a smooth operation for any Platinum Access Systems operator.

• Continuous Duty
• Capaity 1000Lbs./16ft
• Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Swing gate works on slope without coasting
• Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
• Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is sufficient, saving battery life
• Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
• High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
• Solid State Motor Drivers – For quiet and long lasting operation

Click Here For More Info

The BLSW2212 with its ultra-quiet high torque brushless DC motor is the first choice for heavy swing gate applications. This full features state of the art operator uses a 120/220VAC single phase main power source and utilizes a high efficient switching power supply to supply the proper voltage for operation.The operator is equipped with a built-in 24VDC battery backup system and it can operate with a direct solar panel connection as well. This operator is designed to operate in any climate; it does not require a gearbox or a battery heater to operate in -20°F. Temperature between -20°F and -40°F require a battery heater and below -40°F it requires a gearbox heater as well.These unique engineering innovations backed by the safety and reliability of the most advanced control board in the industry ensure a smooth operation for any Platinum Access Systems operator.

• Continuous duty
• Capacity 2200Lbs./12ft. – 1300Lbs./20ft
• Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Swing gate works on slope without coasting
• Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
• Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is sufficient, saving battery life
• Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
• High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
• Solid State Motor Drivers – For quiet and long lasting operation

Click Here For More Info