Doorking Slide Gate Operator, 1HP 9150 081 with 230V or Doorking 9150 088 with 460V
|
|
 |
Door King Gate Openers Model 9310 1 HP
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds
DKS 9310 is designed to operate vehicular slide gates in residential and commercial applications.
The Doorking 9310 is designed so that it can easily be mounted in the front or rear of the gate without any costly and time
consuming field modifications. These are designed to be pad mounted. The Doorking 9310 is available in 1/2 or 1 HP
versions and can be equipped with a factory installed DC Convenience Open option which will automatically open
the gate in the event of a power outage. CALL FOR PRICE
 English Spec Sheet
Spanish Spec Sheet
Manual
 Quick Start
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
Doorking Slide Gate Operator 1HP 9150-081 / 230V
Doorking Slide Gate Operator 1HP 9150-088 / 460V
Advanced Features
Power Start circuit (1/2 HP only).
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered convenience open (optional).
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch
Doorking 9310 1 HP
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open option is
installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
10:1 gear reduction running in a continuous oil bath.
1 HP continuous-duty motor.
115, 230 VAC single-phase, 208, 230, 460 VAC three-phase.
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is
required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry
safety standards.)
Dimensions: 28.5"W x 27.5"H x 16.5"D
OPTIONS AVAILABLE WITH THIS OPERATOR
DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.
|
