 |
Select Engineered Systems SG2 Telephone Entry Control - SES Select Gate2
SG2 STANDARD FEATURES
“Do Not Disturb” by Time Zone (schedule).
100 PIN Codes, each programmable by Time Zone
and function as well as making them valid by date or permanent.
9 Programmable Time Zones.
26 Bit Wiegand Input, for Card Reader, Receiver and Slave Keypad.
100 Cards or Transmitters, for access without using the keypad each programmable
by time zone as well as making them valid by date or permanent.
Click Here For More Info
|
 |
Select Engineered Systems SG2 Telephone Entry Control - SES Select Gate2M
SG2M FEATURES
SG2M is shipped with a 2400 baud modem and programming software.
ALL SG2M functions match the SG2.
SG2’s can not be upgraded to SG2M in the field, and must be ordered as SG2M
Click Here For More Info |
 |
Select Engineered Systems SG3DMR Telephone Entry Control - SES SelectGate SG3DMR
SG3DMR STANDARD FEATURES
• Voice messages for visitor convenience.
• RF Receiver for entrance control built-in.
• 26 Bit Wiegand input, for card reader,
RF receiver and Slave Keypad.
• Supports 100 cards or transmitters, for
access without using the keypad - each
programmable by time zone and function
as well as making them valid by date or
permanent.
• 100 PIN codes, each programmable
by time zone and function as well as
making them valid by date or permanent.
Click Here For More Info |
 |
Select Engineered Systems TEC1 Stanard Telephone Entry System - SES TEC1
FEATURES — ALL MODELS SPECIFICATIONS
Standard Telephone Entry System
• Two line LCD display readable in direct
sunlight or darkness.
• System programmable code length from 1 to
6 digits for codes and PINs.
• Programmable Entry PIN code attempts
(strike out) from 0 to 9 tries.
• Programmable Hide-a-Name feature to conceal
resident identities.
• Provides two door control relays.
• Ability to latch relay or provide remote door
release through telephone touch tones.
Click Here For More Info |
 |
Select Engineered Systems TEC1C, 26-Bit Weigand Card Reader Capable, SES TEC1C
TEC1C - All of the above features plus:
• Weigand 26-bit card-capable, supports two
card readers.
Card capacity of system
matches memory size of TEC1C.
Click Here For More Info |
 |
Select Engineered Systems TEC1CA, Clock, Calendar, Modem and Software included. SES TEC1CA
TEC1CA - All of the above features plus:
• Clock, calendar, modem and software included.
Card capacity of system matches
memory size of TEC1CA.
Click Here For More Info |
 |
Select Engineered Systems TEC2HF Telephone Entry Control - SES TEC 2 HF
The TEC 2 provides a single name, backlit LCD display that will scroll both
forward and backward. The TEC2 characters are 5/16” (8 mm) high. This display
is very clear, even in bright sunlight. Ideal for small apartments or small
gated home sites.
• The TEC 2 will control two entrances, with two relays.
• Maximum phone number capacity is up to 2,000.
• Maximum “PIN” number capacity is up to 2,000.
• Multi-level power surge suppression.
• Non-volatile memory.
• High quality stainless steel face for years of service.
• All pc boards are treated with a moisture barrier.
• Limited 2 year warranty.
Click Here For More Info |
 |
Select Engineered Systems TEC4HF Telephone Entry Control - SES TEC 4 HF
The TEC 4 provides a four names at a time with a backlit LCD display that will
scroll both forward and backward. The TEC4 characters are 3/8” (10 mm)
high. This display is very clear, even in bright sunlight. Ideal for medium sized
apartments, condos or gated communities.
• The TEC 4 will control two entrances, with two relays.
• Maximum phone number capacity is up to 2,000.
• Maximum “PIN” number capacity is up to 2,000.
• Multi-level power surge suppression.
• Non-volatile memory.
• High quality stainless steel face for years of service.
• All pc boards are treated with a moisture barrier.
• Limited 2 year warranty.
Click Here For More Info |
 |
Select Engineered Systems TEC8HF Telephone Entry Control - SES TEC 8 HF
The TEC VIII and AdvanTEC provide outstanding standard features:
• Directory display provides 8 names at a time with characters that are
5/8” (14 mm) high and the directory scrolls forward and backward.
• The LCD directory display is provided with back lighting, and is very clear
even in bright sun light.
• The TEC 8 and AdvanTEC will control two entrances, without options.
• Maximum phone number and name capacity is up to 2,000.
• Maximum PIN (personal identification numbers) is up to 2,000.
• Multi-level surge suppression.
• Non volatile memory.
• The TEC8 is provided with a lighted hood.
• The AdvanTEC is suggested for a lobby or covered entrance.
• 2 year limited warranty.
Click Here For More Info
|
 |
Select Engineered Systems CAT2HF Access Control - SES CAT 2 HF
The CAT 2 provides a single name, backlit LCD display that will scroll both
forward and backward. The CAT2 characters that are 5/16” (8 mm) high. This
display is very clear, even in bright sunlight. Ideal for small apartments or small
gated home sites.
STANDARD FEATURES
• CAT 2 display provides 2 lines and 1 name per directory
screen.
• Displays are backlit and visible in bright sunlight .
• Two wiegand card reader inputs.
• Two entrance control with 2 relays.
• RS485 expansion port.
• Data base has 6 cards per PIN Code / Phone number.
• 56K baud modem.
Click Here For More Info |
 |
Select Engineered Systems CAT4HF Access Control - SES CAT 4 HF
The CAT 4 provides a four names at a time with a backlit LCD display that will
scroll both forward and backward. The CAT4 characters that are 3/8” (10 mm)
high. This display is very clear, even in bright sunlight. Ideal for medium sized
apartments, condos or gated communities.
STANDARD FEATURES
• CAT 4 display provides 4 lines and 4 names per directory
screen.
• Displays are backlit and visible in bright sunlight .
• Two wiegand card reader inputs.
• Two entrance control with 2 relays.
• RS485 expansion port.
• Data base has 6 cards per PIN Code / Phone number.
• 56K baud modem.
Click Here For More Info |
 |
Select Engineered Systems CAT8 Access Control - SES CAT 8 HF
Display provides 8 names at a time with characters that are 5/8” (14 mm)
high and the directory scrolls forward and backward.
• The LCD directory display is provided with back lighting, and is very clear
even in bright sun light.
• 56K baud modem.
• 13,000 event log buffer.
• The CAT 8 and BlackCAT will control two entrances, without options.
• 2 reader inputs (ready to add readers and cards or transmitters and receivers)
• RS485 expansion port (add up to 12 additional readers and 256 relays)
• 16 time zones, 16 access levels and 16 access groups.
• Maximum phone number capacity is 2,700.
• Maximum card (transmitter) capacity is 16,200 (each with a name attached).
Click Here For More Info |
 |
Select Engineered Systems CAT10HF Access Control - SES CAT 10 HF
The CAT 10 provides a multiple name, backlit LCD transflective display that will
scroll both forward and backward to display 10 names at a time. The CAT 10
characters are 1/2” (12.7 mm) high. The first two lines of the main LCD screen are
user programmable. The display is clear, even in bright sunlight. Ideal for apartments,
condominiums, gated communities or assisted living facilities.
• The CAT 10 comes with a back-lit blue keypad for easy night time use. The CAT
10 features the new SES HY-Lock® ultra-vandal resistant lock assembly that firmly
secures the front door using a 1/4 - 20 threaded spindle with a tubular key.
Click Here For More Info |
 |
Select Engineered Systems TEC Vision Telephone Entry Control - SES TEC VISION
• TEC Vision provides three programmable character sizes.
• TEC provides 8, 24 or 48 names per screen.
• The display is scrolled with up and down buttons.
• Maximum phone number and name capacity is 2,000.
• Maximum “PIN’s” (personal identification numbers) is 2,000.
• Multi-level surge suppression provides protection from power spikes.
• Non-volatile memory.
• 16 gauge stainless steel face with heavy gauge aluminum back box.
• All pc boards are treated to resist moisture.
• Supports two entrances standard with two relays.
• Two year limited warranty.
Click Here For More Info |
 |
Select Engineered Systems CAT Color Vision Access Control - SES TEC COLOR VISION
• CAT Color Vision provides 8 font, 8 background colors.
• CAT Color Vision:
Single column shows 8 names approx. 5/8” high, (display features are programmable)
Double column shows 38 names approx. 5/16” high, (display features are programmable)
Three columns shows 90 names approx. 5/32” high
(display features are programmable)
• CAT Vision show 8, 24 or 48 names, programmable.
• Two wiegand card reader inputs.
• Two entrance control with 4 relays.
• RS485 expansion port.
• Data base has 6 cards per Code/Phone number.
Click Here For More Info |
 |
Select Engineered Systems CAT Vision Access Entry Control - SES CAT VISION
2 reader inputs (ready to add readers and cards or transmitters and receivers)
• RS485 expansion port (add up to 12 additional readers and 256 relays)
• 16 time zones, 16 access levels and 16 access groups.
• Maximum phone number capacity is 2,700.
• Maximum card (transmitter) capacity is 16,200 (each with a name attached).
Click Here For More Info |
 |
Select Engineered Systems CATDR4 Access Control - SES CATDR4 CAT Expansion Modules
The CATDR4 works with any CAT and provides four wiegand inputs for card
readers, keypads or long range proximity. Includes all of the necessary relays
to control up to four entrances.
• Each CATDR4 is controlled by the CAT and is connected via RS485.
• Three CATDR4’s may be added to any CAT and the last expansion module
can be 4,000 feet away.
• Each CATDR4 is “opto isolated” from all other expansion modules and the CAT
providing additional surge suppression and isolation of any surge damage.
• CATDR4’s and CATRLY8 may both be added to any CAT.
Click Here For More Info |
 |
Select Engineered Systems CATRLY8 Access Control - SES CATDR4 CAT Expansion Modules
The CATRLY8 provides 8 relays for controlling elevator access.
• The CATRLY8 may also be used to control other items like lights or HVAC systems.
• The CATRLY8 is “opto isolated” from all other expansion modules and the CAT to
provide additional surge suppression and isolation of any surge damage.
• 32 CATRLY8’s may be added to any CAT providing up to 256 relays per system.
• The CATRLY8’s and CATDR4’s may both added to any CAT.
Click Here For More Info |
 |
Select Engineered Systems SAT3 With Hood, Emergency Call Stations - SES SAT 3
• Central Station compatible (SIA Fast Format).
• Telephone line powered.
• 1200 baud modem for programming is included.
• Calls both central station and regular telephone numbers,
in any order.
• “Push for Help” calls up to 10 pre-programmed phone
numbers (16 digits each).
• Calls can only be ended by the called party, time out or call
progress signals.
• Can be called for programming, monitoring, testing and
controlled remotely (password protected).
Click Here For More Info |
 |
Select Engineered Systems SAT3R EMTWM - Self-identifying Automatic Telephone Emergency Tower
Single button push places an emergency or
assistance call based upon up to 10 preprogrammed
telephone numbers or
extensions, as well as activating the strobe
light to attract attention.
• The SAT3R EMTWM can place a call even if
the power has failed, as long as there is a live
telephone line.
• Dialer will automatically roll-over to next preprogrammed
phone number if there is no
answer or the dialed number is busy. Total
capacity is 10 pre-programmed phone
numbers.
• After a dialed call is placed, the called party
can terminate communication. Talk time can
be set from 1-9 minutes or 20 minutes — all
programmable by user.
• Security personnel can call SAT3R EMTWM
for remote audio monitoring functions.
Click Here For More Info |
 |
Select Engineered Systems SAT3R EMTW - Self-identifying Automatic Telephone Emergency Tower
SAT3R EMTW Features:
• Single button push places an emergency or assistance
call based upon up to 10 pre-programmed telephone numbers
or extensions, as well as activating the strobe light to
attract attention.
• The SAT3REMTW can place a call even if the power has
failed, as long as there is a live telephone line.
• Dialer will automatically roll-over to next pre-programmed
phone number if there is no answer or the dialed number is
busy. Total capacity is 10 pre-programmed phone
numbers.
• After a dialed call is placed, the called party can terminate
communication. Talk time can be set from 1-9 minutes or
20 minutes — all programmable by user.
• Security personnel can call SAT3REMTW for remote audio
monitoring functions.
• Emergency dialer phone numbers can be 16 digits long
and can work on most PBX’s.
• System location can be identified by the DTMF touch tones
and Central Station compatibility (SIA Fast Format).
• A.D.A. compliant and provides LED indicators for both
“CALLING” and “TALK”. Braille instructions available for
the sight impaired.
• Emergency dialer provides an additional output relay
that can be used to activate equipment like a camera.
This relay can be activated by the Call button or activated
remotely.
• SAT3REMTW is constructed of heavy 0.250” extruded
aluminum for years of dependable service.
• Multi-level surge suppression built into electronic systems.
• Other size configurations available — consult factory.
• 2 year limited warranty.
Click Here For More Info |
