Power Master SGI - Super Heavy Duty Commercial Sliding Gate Opener
		Model SGI Slide Gate Operator PowerMaster Model SGI Slide Gate Operator is designed for use in Commercial, Industrial and Restricted Access applications for gates up to 80’ wide and 2,000 lbs. Use for up to 45 cycles per hour. - Nitro Board with 4-Line LCD Display - Timer to Close - Dual gate option - Left/Right changeover in field - Padlockable drive disconnect for manual operation - Pad mountable for a strong, solid installation - Optional 18” riser - Cycles Per Hour: 45 - Power Options: 115V, 230V, 460V - Horsepower: 3/4 – 2 - Max Gate Weight: 2000lbs - Max Gate Width: 80ft - Battery Backup: NO - Travel Speed: 9 inches/second - Shipping Weight(approx.): 360lbs (with platform)  Manual  Catalog Cut  Exploded View Parts List Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here

Powermaster SGI 2000 - 1/2 HP Super Heavy Duty Commercial Sliding Gate Opener -- $2,035.33
 

PowerMaster SGI Slide Gate Operators or Openers
Supply Model SGI Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. Operator to have oilbath type, worm gear
reducer. Final reduction and drive chain to be #50 or larger roller chain. Output shafts minimum 1" diameter, supported by sealed roller bearings.
Provide adjustable torque limiting clutch and solenoid operated brake. Mechanical disconnect by means of lockable handle to follow manual
operation. Adjustable limit switches of the positive chain driven type.

Motor to be high starting torque, continuous duty rated industrial type, protected by thermal or current sensing overload device. Motor must be easily
removable without affecting limit switch settings. The motor controller shall be a full voltage, mechanically interlocked interlocked, across-the-line,
reversing contactor.

The Control circuit shall be 24 VAC with pre-wired terminal strips for field connections. Control circuit will provide for 3 button stations, radio controls,
loop detectors, obstruction sensing devices. The control circuit will also provide for open override, 1.5 second delay on reversing and have provisions
for automatic closing timer and timer defeat switch.

An on/off switch will be provided to disconnect power at electrical enclosure. Slide gate operators will be adaptable to master/slave operation without
any additional components. Right hand mounting is standard, field convertible to left hand mounting. Operator shall be assembled in a primed and
painted 10 gauge weatherproof enclosure for mounting on concrete pad.

PowerMaster SGI Sliding Gate Openers Electrical Specifications:
High Starting Torque Motor
Full Overload Protections
24 VAC Control Circuit
Heavy Duty, Full Voltage, Reversing Contactor
3 Button NEMA 1 control Station Included
On/Off Power Switch
Left/Right Direction Switch
Pre-wired to Accept Radio control, 3 Button Station, 1 Button Station, Loop Detectors, Automatic Reversing Equipment, and all types of Access
Controls
Easily Field Converted to Master/Slave (Two Operators Required)
Delay on Reverse
Maximum Run Timer

PowerMaster SGI Slide Gate Operators Mechanical Specifications:
For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2000 lbs. Max.)
45:1 Gear Reducer (Oil Bath Type)
Positive Chain Driven Rotary Limit Switches
Gate Driven by #50 Heavy Duty Roller Chain, Provided with Operator
1" Drive Shaft Supported by Roller Bearing Pillow Blocks
Adjustable Torque Limiting Clutch
Electric Solenoid Operated, Double Shoe Brake
10 Gauge Weather Proof Enclosure