Power Master SG 2004 Operator with 3HP, PowerMaster Super Heavy Duty Sliding Gate Opener
		Specifications: 45:1 Gear Reducer (Oil Bath Type) Positive Chain Driven Rotary Limit Switch Gate Driven by #50 Heavy Duty Roller Chain, Included 1" Drive Shaft Supported by Roller Bearing Pillow Blocks Adjustable Torque Limiting Clutch Electric Solenoid Operated, Double Shoe Brake Manual Disconnect Provided Steel All Weather Hinged Enclosure w/Lock  Manual  Exploded View Parts List   Power Master SG 2004 3HP Super Heavy Duty Sliding Gate Opener -- $8,599.00

Specifications:
Supply Model SG Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. Operator to have oilbath type, worm gear
reducer. Final reduction and drive chain to be #50 or larger roller chain. Output shafts minimum 1" diameter, supported by sealed rolller bearings.
Provide adjustable torque limiting clutch and solenoid operated brake. Mechanical disconnect by means of lockable handle to allow manual
operation. Adjustable limit switches of the positive chain driven type. A spring set, solenoid released, double shoe brake shall be provided to
prevent gate from coasting.

Motor to be high starting torque, industrial type, removable without affecting limit switch settings, and shall incorporate thermal overload
protection. The motor controller shall be a full voltage, across-the-line, mechanically interlocked reversing contactor.

The Control circuit shall be 24 VAC and shall include a maximum run timer to limit run time to 90 seconds or less, a 1.5 second delay on reverse to
reduce shock loads on gate and provisions for all types of obstruction sensing devices. A clearly marked, thermal strip shall be provided for all
field connections. The control shall have provisions for connecting; 3 button stations, single button stations, radio controls, loop detectors and
automatic closing timer without additional changes.

The operator must be field convertible from right hand to left hand and for use as a single, master or slave without additional parts or
modifications. An on/off switch will be provided to disconnect power at electrical enclosure. The operator stand shall be heavy gauge steel, primed
and painted to resist corrosion with provisions for mounting to concrete pad.

The weather proof cover shall have a lockable hinged cover for access to control equipment.

Electrical
Specifications:
High Starting Torque Motor
Full Overload Protection
24 Vac Control Circuit
Heavy Duty, Full Voltage Reversing Contactor
3 Button NEMA 1 Control Station Included
On/Off Power Switch
Left/Right Direction Plug
Pre-wired to Accept Radio Control, 3 Button Station, 1 Button Station, Loop Detectors, Automatic Reversing Equipment and all Types of Access
Controls
Easily Field Converted to Master/Slave (Two Operators Required)
Delay on Reverse Wiring is Standard
Maximum Run Timer

Mechanical
Specifications:
For Use on Commercial or Industrial Slide Gates up to 50' Wide or 2000 lbs. Max.
45:1 Gear Reducer (Oil Bath Type)
Positive Chain Driven Rotary Limit Switch
Gate Driven by #50 Heavy Duty Roller Chain, Included
1" Drive Shaft Supported by Roller Bearing Pillow Blocks
Adjustable Torque Limiting Clutch
Electric Solenoid Operated, Double Shoe Brake
Manual Disconnect Provided
Steel All Weather Hinged Enclosure w/Lock