Power Master SG 2004 Sliding Opener, Power Master 1 1/2HP Super Heavy Duty Gate Opener
		45:1 Gear Reducer (Oil Bath Type) Positive Chain Driven Rotary Limit Switch Gate Driven by #50 Heavy Duty Roller Chain, Included 1" Drive Shaft Supported by Roller Bearing Pillow Blocks Adjustable Torque Limiting Clutch Electric Solenoid Operated, Double Shoe Brake Manual Disconnect Provided Steel All Weather Hinged Enclosure w/Lock  Manual  Exploded View Parts Lis Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here

Powermaster SG 2004 1 1/2HP 115 Volt 1 Phase Super Heavy Duty Gate Opener -- $2,795.00
 

Powermaster SG 2004 1 1/2HP 230 / 208 Volt 1 Phase Super Heavy Duty Gate Opener -- $2,795.00
 

Powermaster SG 2004 1 1/2HP 230 / 208 Volt 3 Phase Super Heavy Duty Gate Opener -- $2,795.00
 

Powermaster SG 2004 1 1/2HP 460 Volt 3 Phase Super Heavy Duty Gate Opener -- $2,795.00
 

Specifications:
Supply Model SG Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. Operator to have oilbath type, worm gear reducer. Final reduction and drive chain to be #50 or larger roller chain. Output shafts minimum 1" diameter, supported by sealed rolller bearings. Provide adjustable torque limiting clutch and solenoid operated brake. Mechanical disconnect by means of lockable handle to allow manual operation. Adjustable limit switches of the positive chain driven type. A spring set, solenoid released, double shoe brake shall be provided to prevent gate from coasting.

Motor to be high starting torque, industrial type, removable without affecting limit switch settings, and shall incorporate thermal overload protection. The motor controller shall be a full voltage, across-the-line, mechanically interlocked reversing contactor.

The Control circuit shall be 24 VAC and shall include a maximum run timer to limit run time to 90 seconds or less, a 1.5 second delay on reverse to reduce shock loads on gate and provisions for all types of obstruction sensing devices. A clearly marked, thermal strip shall be provided for all field connections. The control shall have provisions for connecting; 3 button stations, single button stations, radio controls, loop detectors and automatic closing timer without additional changes.

The operator must be field convertible from right hand to left hand and for use as a single, master or slave without additional parts or modifications. An on/off switch will be provided to disconnect power at electrical enclosure. The operator stand shall be heavy gauge steel, primed and painted to resist corrosion with provisions for mounting to concrete pad.

The weather proof cover shall have a lockable hinged cover for access to control equipment.

Electrical
Specifications:
High Starting Torque Motor
Full Overload Protection
24 Vac Control Circuit
Heavy Duty, Full Voltage Reversing Contactor
3 Button NEMA 1 Control Station Included
On/Off Power Switch
Left/Right Direction Plug
Pre-wired to Accept Radio Control, 3 Button Station, 1 Button Station, Loop Detectors, Automatic Reversing Equipment and all Types of Access
Controls
Easily Field Converted to Master/Slave (Two Operators Required)
Delay on Reverse Wiring is Standard
Maximum Run Timer

Mechanical
Specifications:
For Use on Commercial or Industrial Slide Gates up to 50' Wide or 2000 lbs. Max.
45:1 Gear Reducer (Oil Bath Type)
Positive Chain Driven Rotary Limit Switch
Gate Driven by #50 Heavy Duty Roller Chain, Included
1" Drive Shaft Supported by Roller Bearing Pillow Blocks
Adjustable Torque Limiting Clutch
Electric Solenoid Operated, Double Shoe Brake
Manual Disconnect Provided
Steel All Weather Hinged Enclosure w/Lock