OSCO VS-GSWG 783 with 208, OSCO VS-GSWG 723 with 230V, OSCO VS-GSWG743 with 460 & 2HP, OSCO Heavy Duty Industrial or Commercial Automatic Gate Opener
|
|
 |
Now Includes APeX Controller!
The Model VS-GSWG is a heavy-duty variable speed swing gate operator designed for smooth, secure and reliable operation of large, heavy swing gates. The positive locking linear drive arm design provides enhanced security, plus increased ability to withstand high wind loads - especially important for large, heavy gates. The VS-GSWG is available in 1/2, 1 or 2 HP, 115V-460V single- or three-phase power, 18-22 second gate opening speed.
 Manual
Spec Sheet
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
Linear - OSCO VS-GSWG 723- 2 HP 230 Volt/ 3 Phase Commerical Linear Gate Operator -- $4,131.00
 
Linear - OSCO VS-GSWG 743- 2 HP 460 Volt/ 3 Phase Commerical Linear Gate Operator -- $4,131.00
Linear - OSCO VS-GSWG 783- 2 HP 208 Volt/ 3 Phase Commerical Linear Gate Operator -- $4,131.00
Ratings
- Maximum duty cycle: Continuous
Features
- Integral APeX Controller
- For large/heavy swing gates
- Continuous-duty industrial 56-frame motor
- Full variable speed
- Soft start/soft stop capability
- All voltages, single or three-phase
- Emergency disconnect
- Electrical power disconnect
- On-board APeX Controller three-button control station
- Master/second built in
- Durable powder coat finish
- Right hand - left hand convertible
- Timer to close
- Post mount standard; pad mount optional
- Powder coat finish
- ETL Listed for UL 325 (Class I-IV) for U.S. and Canada
Electrical
- Variable speed - soft start/ stop programmable through variable frequency drive
- Duplex receptacle on 115 VAC units
- AC and DC power available for access control accessories and reversing devices
- All accessory connections 24 VDC
- Easily adjustable rotary limit switches
Mechanical
- Heavy-duty 60:1 right-angle C-face gear reducer
- Adjustable torque limiter
- Exclusive linear drive arm
- Heavy-duty pillow-block bearings
Factory Options
- Optional pad mount pedestal
Warranty
SWG Models
| MODEL |
HP |
VOLTAGE &
PHASE |
DRIVE
TYPE |
MAX.
GATE
LENGTH |
MAX.
GATE
WEIGHT |
SECS.
TO
OPEN |
| VS-GSWG-783 |
2 |
208V 3P |
Linear |
36 FT. |
1500 LBS. |
18-22 seconds |
| VS-GSWG-723 |
230V 3P |
| VS-GSWG-743 |
460V 3P |
|
