|
Powermaster CSWC 2004 1/2HP 115 Volt 1 PhaseCommercial Heavy Duty Swing -- DISCONTINUED
Powermaster CSWC 2004 1/2HP 230 / 208 1 Phase Volt Commercial Heavy Duty Swing -- DISCONTINUED
Powermaster CSWC 2004 1/2HP 230 / 208 Volt 3 Phase Commercial Heavy Duty Swing -- DISCONTINUED
Powermaster CSWC 2004 1/2HP 460 Volt 3 PhaseCommercial Heavy Duty Swing -- DISCONTINUED
PowerMaster CSWC 2000 or 2004 Swing Gate Operator
TECHNICAL SPECIFICATIONS
Power requirements: 115/208/230/460/575 Volts 1or 3 Phase
Class 2 low voltage control circuit
Available horse power: 1/2 HP - 1 HP
PowerMaster CSWC Gate Openers or Operators Electrical Specifications
High Starting Torque Motor
Delay on Reverse Wiring is Standard
Full Overload Protection
Heavy Duty Full Voltage, Reversing Contactor
On/Off Power Switch
24 VAC Control Circuit
Pre-wired to Accept Radio Control
Reversing Equipment, All Types of Control Devices, Automatic Closing Timers, and Loop Detectors.
3 Button NEMA I Control Station Included
Can be Field Converted to Master/Slave Operation (Two Operators Required)
Maximum Run Timer
PowerMaster CSWC 2000 or 2004 Gate Openers Mechanical Specifications
For Commercial or Industrial Swing Gate (up to 22' Wide or 1200 Lbs. Max.)
Heavy Duty Swing Arms
Designed for Pad Mounting
Gate Mechanically Locked in Closed Position
Adjustable Torque Limiting Clutch
45:1 Gear Reducer (Oil Bath Type)
#50 Chain and Sprocket Final Reduction
Hinged Access Doors w/Lock
Positive Cam Actuated Limit Switches
Universal Left or Right Hand Mounting
Heavy Gauge Steel, All Weather Enclosure
Model CSWC 2004 Swing Gate Operato TECHNICAL SPECIFICATIONS
Power requirements: 115/208/230/460/575 Volts 1or 3 Phase
Class 2 low voltage control circuit
Available horse power: 1/2 HP - 1 HP
Electrical Specifications
High Starting Torque Motor
Delay on Reverse Wiring is Standard
Full Overload Protection
Heavy Duty Full Voltage, Reversing Contactor
On/Off Power Switch
24 VAC Control Circuit
Pre-wired to Accept Radio Controls, Reversing Equipment, All Types of Control Devices, Automatic Closing Timers, and
Loop Detectors.
3 Button NEMA 1 Control Station Included
Can be Field Converted to Master/Slave Operation (Two Operators Required)
Maximum Run Timer
For Commercial or Industrial Gates
(up to 30 Feet Wide or 2000 Lbs.)
Extra Heavy Duty Arms
Designed for Pad Mounting
Adjustable Torque Limiting Clutch
Gate Mechanically Locked in Closed Position
Heavy Duty Bronze Worm Gear
Running in Oil Bath
All Shafts Running in Ball Bearings
Universal Left or Right Hand Mounting
Slow Speed Modification (optional)
Heavy Gauge Steel, All Weather Enclosure |
