Elite Robo Slide Gate Opener, Elite Sliding Gate Opener - Elite Robo Slide
|
|
 |
Elite Gate Openers RoboSlide
Engineered for easier installation and enhanced operation. The
Elite RoboSlide is our most advanced slide gate opener for single family
residences. Designed for super-quiet and reliable performance, it can
handle up to 70 cycles per day with gates weighing up to 800 lbs. and up
to 20 feet in length. Plus, what makes this system truly unique is its long
list of built-in safety and convenience features. To simplify installation,
the operator may be installed with low-cost, low-voltage wiring or in
remote locations using our optional “Solar 3” 12-volt power system. It is
also equipped with an automatic closing timer, safety reversing sensor,
electronic shutoff and may be set up with an optional safety loop system. Uses only a 12 volt, battery system that can be charged either through
the solar panel or plug in transformer.
 Manual
Click Here for Replacement Parts Robo Slide |
The Elite RoboSwing has been Replaced with Liftmaster RSL12U - Please Click For More Information
Chamberlain Professional Products presents the RoboSlide the
intelligent gate operator. Elite RoboSlide is a heavy-duty
residental sliding gate operator. The suggested usage is a
single family home. It can handle up to 70 cycles of operation a
day on a gate up to 800 lbs. and 20 feet in length. This unique
gate operator can be used as a wireless unit with the optional
"Solar 3" power system or can be installed with up to 1000 feet
of low voltage wire(reduces cost of wiring). The super quiet
gate operator works with a continous cycle DC motor and gear
reducer (transmission).
Elite RoboSlide Gate Operators Mechanical Specifications
Motor - 12V DC
Cycles - 70 / day with transformer, transformer uses low voltage wire and can be installed up to 1000' from the gate operator.
Maximum Gate Size/Weight - Up to 20' length, gate weighing up to 800 lbs.
Gate Traveling Time - Opens gate at 11 inches per second.
Limit Switch System - Uses a precise limit switch system that reduces stress and creates a constantly smooth operation.
Chassis - 1/8" sheet metal, welded and fully plated.
Cover - Heavy-duty weatherproof polyethylene plastic.
Gear Box - 30 to 1 ratio gear reducer in an oil bath, delivers smooth and quiet operation.
Manual Disconnect - Emergency chain release available for manual operation.
Warranty - Elite warrants the RoboSlide for 3 years from the date of purchase.
Shipping Weight - 104 lbs.
Operator Dimensions - Length: 13.75", Width: 14.5", Height: 21.25".
Elite RoboSlide Gate Operators Electrical Specifications
Battery - Sealed 12-volt, 7 amp hour battery for long life.
Receiver - Built-in receiver included
Control Board - Modular control board uses LED's to indicate all input and output functions of the operator.
Reversing Sensor - If the gate hits a vehicle while closing it re-opens. If it hits a vehicle while opening it stops, reverses
several inches and stops again.
Timer - Can be set from 0 to 60 seconds.
Safety Loop Input - RoboSlide is capable of accepting a safety loop system.
Alarm - Alarm will sound anytime the moving gate is physically stopped by an unwanted object.
Surge Suppressor Terminal - Surge suppressor included, protects against lightning.
Electronic Inputs - Full-control system "open/stop/close", safety loop, photocell, telephone entry, and key switch.
Optional Solar Input - The optional solar panel allows the RoboSlide to operate as an independent unit.
Elite RoboSlide Gate Operator Includes:
One Operator
One 20' #41 Gate Chain
Sealed 12-volt, 7 amp hour battery for long life
LiftMaster 312HM Security+ ERT Receiver - 315MHz
Control board with Surge Suppressor Terminal
Caution signs
Installation/safety manual
|
