Eagle Sliding Gate Opener, Eagle 2000 Gate Opener, Eagle 1/2 HP Automatic Gate Opener
		Eagle Sliding Gate Openers 2000 Fail-Safe OR Fail-Secure With four models to choose from, Eagle 2000 is the reliable choice for all your commercial and industrial slide gate opener needs; combining big heavy gates with high traffic use for smooth powerful operation. Install Eagle 2000 for reliable power. 1) Eagle 2000 Fail Safe 2) Eagle 2000 Safe Secure 3) Eagle 2000 1HP 4) Eagle 2000 DM - Installation is made simple with the advanced features you most often need standard on every operator; features like Stop-Reverse allowing your transmitter to work like a 3-button station, or motor brake for added control on downhill applications. Dual gate Master/Slave operation has never been easier. Just two wires provide full Master/Slave communication. Global inputs between master and slave operator allow connection of any accessories to either the master or slave and the Diamond Control Board does the rest.  Manual English  Manual Spanish  Spec Sheet

Eagle Gate Openers Sliding Commercial-2000 Eagle Automatic Gate Operators -- $ 1,150.00

Eagle Gate Openers Remote Control Commercial-2000-1hp Electric Gate Operators -- $ 1,629.00

Eagle Gate Operators Electric Commercial-2000-DM Automatic Slide Gate Openers -- $ 1,629.00

Eagle 2000 Sliding Gate Operators or Eagle 2000 Slide Gate Openers
Diamond Control Board - The unique Diamond board uses state of the art technology combined with easy of use to provide many exceptional new
features that cannot be found on any other board.
2 Wire Maser/Slave - The Diamond board uses a unique Master/Slave system that requires only two wires.
Motor Brake - If the on position is selected, the gate will stop instantly when it reaches the limit switches. This is essential on uphill/downhill
applications and on all Fail Safe operations.
One Pass - This tailgating feature works with the reverse loop to allow only one car to pass. After the car passes the gate closes instantly, if a
second car approaches the gate stops, and resumes closing once the car has left.
Stop-Reverse - This radio feature allows the transmitter to work as a three-button station and is useful for partial opening. The first command
opens the gate, the second stops the gate, and the third command will close the gate.
Timer - The adjustable timer can be set from 1 to 60 seconds, with a maximum run time of 60 seconds.
Overload - If the motor reaches the stall amp for 3 seconds, it will automatically shut down.
ERD - If the gate hits an obstruction while closing, it will re-open. If it hits an obstruction while opening, it will stop, reverse 6 inches and stop again.
The sensitivity is adjustable separately for the open and close cycles.
Global Inputs - The Diamond board's Global Inputs include key switch, keypad, exit loop, phantom loop, reverse loop, edge sensor, open, stop, and
close.
Outputs - Outputs include on board 24 VDC for MAG Lock, alarm, and 24 VAC auxiliary power.
Receiver - The Receiver Terminal is mounted on the control box for easy installation and is pre-wired for a 3-wire or 4-wire receiver.
Safety Alarm - If the gate hits an object twice while closing or opening, the system will shut down for 5 minutes. On the Diamond board you have
two options for reset mode. Selecting the off position will require a manual reset of the board if the previous happens. However, by selecting the on
position, the system will automatically reset itself.
120 VAC Power Outlets - The operator contains two 120 VAC Power Outlets for the users convenience.
Power on/off Switch - The operator has an easily accessible power disconnect switch that allows for easy installation and service.
Warranty - Five Year warranty, extended to seven years if for residential use