Ramset 5000 Gate Operator, Ramset 5000 Series, Ramset Sliding Gate Operator
|
Ramset Operator 5000 Series - Ramset Sliding Gate Operator - Commercial Gate Operator -- $ 1,524.00
 
|
 |
Ramset Sliding Gate Operators - Ram 5000 UL 1/2hp
Max Gate Size 40' Max Gate Weight 1000 lbs. Motor Continuous duty. 1/2 Hp, 120VAC,
50/60 hz
Dimensions H:25" - L:18 1/2" - W:16 1/2"
Travel Speed 1' Per Second
Electronic Features
Control Board: easy to configure solid state board with features such as L.E.D. readouts
to indicate status of operator at all times
Electronic Reversing Device (ERD): two separate adjustments for reversing when
encountering obstruction during opening or closing; reverses for 1 second and stops
Audio Alarm: audio alarm will sound for approximately six minutes, but only when the gate
hits an obstruction twice; input to reset alarm included
Automatic Timer: can be set from 0 to 60 seconds
Maximum Running Timer: motor shuts off after 60 seconds
Master/Slave: included five wire connection to synchronize movement between two
gates
Electronic Inputs: for radio receiver, fire department box, numeric key pad, metal
detector, center loop, telephone entry system, three button station, photo cell, safety
edge and magnetic lock
 Manual Spec Sheet
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here |
Ramset 5000 gate opener kit
Products related to the kits
 |
433MHz Long Range Antenna
Description
433MHz Long Range Antenna for use with our long range receivers
- Antenna 433MHz
- magnetic locks
- electric strikes
- electric deadbolts
433MHz Long Range Antenna for use with our long range receivers -- $ 19.95
|
 |
Mini-Remote Control model 433 MHz 2-Button
Features
Moderne, elegant, sober and light, Mini-Remote can be used on all existing 433 MHz Mini-receiver offered on L.A Ornamental, and is fully compatible with all our transmitters of this same frequency.
- White shiny casing, chrome-plated contour and buttons
- Rolling code
- Easyroll
- Nominal range : 150 feet in free field
Mini-Remote Control model 433 MHz 2-Button -- $ 17.50
|
 |
Allen Bradley 60-2728 Reflective Photo Eye
Allen Bradley 60-2728 retro-reflective photo eyes, 12VDC/24VAC/DC NEMA 3,4,4X,6P,1, 30' maximum detection range
Reflective photo eye
- 3'' diameter reflector
- 12-24 VDC or 24 VAC
- 30' sensing distance
- UL325 Compliant
Allen Bradley 60-2728 Reflective Photo Eye $ 179.00
|
 |
Garage Door Opener Receiver Kit
This unique product can function at a range of up to 150 feet, making it a great choice for specific industrial or farm uses. You can install this 433 MHz Mini-Universal receiver model for a range of applications. Regardless of location, this receiver will be sure to work when you're within a radius of 150 feet from the receiver.
Kit Include:
- Receiver 433 MHz range of up to 150 feet
- Two Mini-Remote Control model 433 MHz 2-Button
Specification
- One Channel, 1000 Codes memory
- wired output
- 433 MHz
- Radius of 150 feet
Our Price: $ 79.95
|
 |
EMX Lite Preformed Loop 4x8
The Lite Preformed Loop Detector is a ready-to-use loop that works with all
EMX loop detectors. This lightweight preformed loop detector is suitable for
saw cut, tar and concrete installations.
Inquire for special sizes and quotes.
Benefits include:
Easy to install
Electronic lightning protection
Rugged and flexible TPE tubing
Custom sizing Available
|
 |
EMX MVP D-TEK loop detector 9V to 220V AC or DC
The EMX MVP D-TEK loop detector is 9V to 220V AC or DC and is designed to be a universal voltage loop detector. The MVP D-TEK solves the problem of not knowing which voltage to have for your installation.
Benefits include:
Universal voltage
Reduced inventory costs
Operates in both fail safe and fail secure modes
Power 9 VDC to 240VAC
EMX D-TEK MVP Multi Voltage Power
Universal Loop Detector -- $109.95
|
 |
EMX Loop detectors HAR-11 Pin Harness
11 pin detector harness for use with our loop detectors and CarSense 101.
EMX Loop detectors HAR-11 Pin Harness -- $ 14.00
|
 |
American Access System AdvantageDKE 26-100L & 26-100sg
AdvantageDKE line of digital keyless entry offers both post or single gang, surface mount configurations. All models are stand alone
and have 100 fully programmable, four digit codes. AdvantageDKE post mount models are housed in heavy metal, powder coated
enclosures with stainless steel faceplates.
Features
100 programmable four digit codes
Programmable Personal Master Code
Programmable Latch / Unlatch Code
Night Light
Variable relay output time: 1 – 9 seconds
Audible tone
Non-volatile memory
Power consumption: 25mA @ 24VAC
Limited two year warranty
Our Price: $ 162.00
|
 |
BFT "POLARIZED" / Retro-reflective Photocell
Specifications:
Polarized Sensor
Red infrared led element
IP-66 water proof/cable gland
PMMA upper casing, anti fog/dew/rain
Round shape reflector-Dia.:80mm
Input volt: AC/DC 12-250V non polarity
Twin colorsled indicator for beam alignment
Tamper switches included
Sensing range 35ft.
BFT Photo Cell / Photo Eye with Reflector -- $ 119.00
|
 |
EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft
Outdoor Buried Driveway Sensor Alarm Carsense 202 Slim Features • Sensing probe is buried in the ground so it is not noticed by a potential intruder or vandals. • Has wide power supply options and it can be ordered in 9 V to 35 V AC or DC. The low current consumption of 1.5 mA in standby and 15 mA activated make it an excellent choice for solar power applications.
EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft -- $144.95
|
 |
DOLKWP300318 - 300/318 MHz Dual Frequency Keypad
FEATURES:
• Wireless Keypad: 300 MHz (Compatible with Multicode® 10-dip switch)
OR
• 318 MHz 9-dip switch (Compatible with Allstar® 9931 and Heddolf® P220
- Stainless steel faceplate
- Rubber back lit keys
- Hard wired or wireless
- User friendly coding
- Holds up to 99 individual 4-digit codes
- ABS housing
- Adjustable relay hold feature
- LED indicator
- Surface or Post mount
- Optional security screw kit available
DOLKWP300318 - 300/318 MHz Dual Frequency Keypad-- $49.95
|
 |
Standard GooseNeck Pedestal - Aluminum - White
Aluminium goose neck Curb mount The Model GNC-1 Curb Mount Gooseneck is used for easy installation of keypads, telephone entry systems, and other access control products. Features Curb mount configuration Rugged, weather resistant, powder coated rolled Aluminum construction Universal bolt pattern on base plate and faceplate fits all manufacturer's products 5.25" W x 42" H x 15.5" D
Regular Price: $ 149.00
Our Price: $ 119.00
Standard Pad Mount Goose Neck Pedestal - Aluminum
2" X 2" X 42" - White
|
 |
Standard GooseNeck Pedestal - Aluminum - Black
Aluminium goose neck Curb mount The Model GNC-1 Curb Mount Gooseneck is used for easy installation of keypads, telephone entry systems, and other access control products. Features Curb mount configuration Rugged, weather resistant, powder coated rolled Aluminum construction Universal bolt pattern on base plate and faceplate fits all manufacturer's products 5.25" W x 42" H x 15.5" D
Regular Price: $149.00
Our Price: $ 119.00
Standard Pad Mount Goose Neck Pedestal - Aluminum
2" X 2" X 42" - Black
|
|
|
Ramset 5000 Gate Operators
STANDARD FEATURES State-of-the-art
processor controlled circuit board
Electronic reversing sensor
Will adjust to gate weight
Timer can be set from 0-60
secondsMaster/Slave using 3 wires
Electronic inputs for radio receiver, fire
department, photocell and more
MANUAL RELEASE
Fail secure: crank gate to open
GATE CAPACITY
Maximum gate length 40'
Maximum gate weight 1,000lbs.12" per
second
Continuous cycles duty
Ram 5000 1/2 Hp, 120VAC slide gate operator
Max Gate Size 40'
Max Gate Weight 1000 lbs.
Motor Continuous duty. 1/2 Hp, 120VAC, 50/60 hz
Emergency Release chain release, Battery Back-up System, Power Inverter
Dimensions H:25" - L:18 1/2" - W:16 1/2"
Travel Speed 1' Per Second
Ramset 5000 Slide Gate Operators or Openers Electronic Features
Control Board: easy to configure solid state board with features such as L.E.D. readouts to indicate status of operator at all times
Electronic Reversing Device (ERD): two separate adjustments for reversing when encountering obstruction during opening or closing; reverses for
1 second and stops
Audio Alarm: audio alarm will sound for approximately six minutes, but only when the gate hits an obstruction twice; input to reset alarm included
Automatic Timer: can be set from 0 to 60 seconds
Maximum Running Timer: motor shuts off after 60 seconds
Master/Slave: included five wire connection to synchronize movement between two gates
Electronic Inputs: for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button
station, photo cell, safety edge and magnetic lock
|
