Eagle 1 Gate Opener, Eagle One Slide Gate Opener, Eagle Slide Gate Operator
|
|
 |
Eagle 1 Slide Gate Openers - Eagle One
Safe and secure gate operation is made quick and easy with pad-mount gate
operators from Eagle. Enjoy quality and reliability with the Eagle I Slide Gate
Operator. Manufactured with the same quality and engineering as larger
commercial and industrial gate operators, many of the advanced features you
most often need come standard. Like every Eagle operator, the Eagle-I is built
with heavy-duty AC motors, quiet gearboxes and quality components
throughout. Install Eagle and install confidence.
 Spec Sheet
|
Eagle One or Eagle 1 Residential Gate Operators, Sliding Gate Opener -- $799.00
 
Eagle One Gate Operators or Gate Openers Specifications
Control Board - The Unique Control Board uses state of the art technology combined with ease of use to provide many exceptional features not found
in any other board
2 Wire Maser/Slave - The board uses a unique Master/Slave system that requires only two wires.
Motor Brake - If the on position is selected, the gate will stop instantly when it reaches the limit switches. This is essential on uphill/downhill
applications and on all Fail Safe operations.
Stop-Reverse - This radio feature allows the transmitter to work as a three-button station and is useful for partial opening. The first command opens
the gate, the second stops the gate, and the third command will close the gate.
Timer - The adjustable timer can be set from 1 to 60 seconds, with a maximum run time of 60 seconds.
Overload - If the motor reaches the stall amp for 3 seconds, it will automatically shut down.
ERD - If the gate hits an obstruction while closing, it will re-open. If it hits an obstruction while opening, it will stop, reverse 6 inches and stop again.
The sensitivity is adjustable separately for the open and close cycles.
Global Inputs - The Diamond board's Global Inputs include key switch, key pad, exit loop, edge sensor, open, stop, and close.
Outputs - Outputs include on board 24 VDC for MAG Lock, alarm, and 24 VAC auxiliary power.
Receiver - The Receiver Terminal is mounted on the control box for easy installation and is pre-wired for a 3-wire or 4-wire receiver.
Safety Alarm - If the gate hits an object twice while closing or opening, the system will shut down for 5 minutes. On the control board you have two
options for reset mode. Selecting the off position will require a manual reset of the board if the previous happens. However, by selecting the on
position, the system will automatically reset itself.
120 VAC Power Outlets - The gate opener has an easy accessible power disconnect switch that allows for easy installation and service.
Warranty - Five Year residential us
|
