GATE OPENER BRANDS
|
Apollo 1500 Swing Gate Operator (Up to 16ft & 600lbs) Black, Includes 416E & 635 ------ $ 1,114.47
 
|
Apollo 1500 Swinging Gate Operator- Apollo 1500 Swinging Gate Operator
Apollo opener offers its single actuator swing gate operator in two Models, the Apollo 1500 and the apoll 1550 etl. Both models are easily installed on most existing or new swing gates of up to 16 feet in length and 600 pounds. The 1550 ETL model utilizes our advanced circuit board, which offers the popular soft start/soft stop feature, as well as additional inputs for a firebox, monitor lights, a lock, siren and strobe lights. Unlike other operators on the market, the Apollo 1550 ETL model actually learns and stores in memory both the current limit settings and the length of the actuator stoke, creating a default setting for future cycles – allowing for longer operator life and greater safety.
Apollo 1500 Swing Gate Operator
APPLICATIONS: Battery Operated, Solar or AC Charged Swing Gate Operator.
Recommended for Residential, Farm and Ranch, and Light
Commercial applications. Recommended for gates up to 16 feet in
length and 600 lbs. each. SPECIAL APPLICATIONS: Can be used in push to open or pull to open applications. This permits the choice of having
the actuator inside or outside the gate regardless of hinge left or right. Direct drive system attaches directly
to the gate. OPEN OR CLOSE CYCLE TIME: Each direction, 15 seconds. BATTERY/ CONTROL PANEL BOX: 18” (46cm) x 18” (46cm) x 8” (20cm) Powder Coated Black, Weather resistant NEMA
3R. ACTUATOR: Rust Proof linear, acme screw drive; self-lubricating gears. Supplied
with 8 ft. (2.4m) of cable. Externally adjustable limit switches. SHIPPING INFORMATION: 2 boxes
Apollo 1500 Swing Gate Operator
GENERAL DESCRIPTION: Apollo swing and slide gate operators are ready for installation upon receipt. A professional
installer is recommended. Some welding is required for proper installation. BATTERY REQUIREMENT: 12 volt battery. Apollo recommends a maintenance-free, deep cycle marine battery – 105
amp./hour. (Not supplied) NOTE: In the event of electrical power outage, or significantly overcast days, a fully charged
deep cycle marine battery (recommended) will provide up to 300 cycles or 30 days usage on a basic system before
requiring a recharge. CIRCUIT BOARD: All standard Apollo operators are shipped with the 635/835 circuit board. Features of this board include:
- Automatic, Adjustable Close Timer
- Adjustable Current Sensitivity for Automatic Safety Reverse
- Inputs for: Free Exit Loops, Safety Loops, Under Gate Loops, Safety
- Edges, Free Exit Probes, Keypads, Telephone Entry Systems, Intercom
Systems, Pushbuttons, Locks, Radio, Receivers
- Fully Systems Capable
APOLLO 400 UPGRADE KIT: For use with Apollo Model 1500 & 1550ETL Swing Gate Operators
Recommended for gates over 16’ (5m) and up to 20’ (6m).
The model 1500/1550ETL actuator is mounted between #400 arms. The
operator now attaches to the gate at 8 ft. (2.4m) for better gate control. WEIGHT: 1 box, 27 lbs. (12.2 kg).
 Manual Spec Sheet
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
|
Apollo 1500 Gate Opener kit 1
Include:
- Control Box with 636 Control Board
- Opener ( one 416 Arm )
- Photo Cell / Photo Eye with Reflector
Apollo 1500 Kit $ 1,252.32
Apollo 1550 ETL Kit $
1,610.21
|
|
Apollo 1500 Gate Opener kit 2
Include:
- Control Box with 636 Control Board
- Opener ( one 416 Arm )
- 318N Receiver 433.92 MHz
- Two remote control INTI2 433.92 MHz
- Automatic 1-1/2 Amp Battery Charger
- Photo Cell / Photo Eye with Reflector
Apollo 1500 Kit $ 1,337.27
Apollo 1550 ETL Kit $ 1695.16
|
|
Apollo 1500 Gate Opener kit 4
Include:
- Control Box with 636 Control Board
- Opener ( one 416 Arm )
- Receiver 433 MHz range of up to 150 feet
- Two Mini-Remote Control model 433 MHz 2-Button
- Automatic 1-1/2 Amp Battery Charger
- Photo Cell / Photo Eye with Reflector
- Wireless keypad RADIOKEYD 433 MHz
Apollo 1500 Kit $ 1,557.22
Apollo 1550 ETL Kit $ 2,090.11
|
|
Apollo 1500 Gate Opener kit 5
Include:
- Control Box with 636 Control Board
- Opener ( one 416 Arm )
- Receiver 433 MHz range of up to 150 feet
- Two Mini-Remote Control model 433 MHz 2-Button
- Automatic 1-1/2 Amp Battery Charger
- Photo Cell / Photo Eye with Reflector
- Wireless keypad RADIOKEYD 433 MHz
- EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft
Apollo 1500 Kit $ 1,682.17
Apollo 1550 ETL Kit $ 2,215.06
|
|
Apollo 1500 Gate Opener kit 3
Include:
- Control Box with 636 Control Board
- Opener ( one 416 Arm )
- 318N Receiver 433.92 MHz
- Two remote control INTI2 433.92 MHz
- Photo Cell / Photo Eye with Reflector
- Solar Panel 5 Watt 12 volt
Apollo 1500 Kit $ 1,512.27
Apollo 1550 ETL Kit $ 1,870.16
|
|
Apollo 1500 Gate Opener kit 6
Include:
- Control Box with 636 Control Board
- Opener ( one 416 Arm )
- Receiver 433 MHz range of up to 150 feet
- Two Mini-Remote Control model 433 MHz 2-Button
- Photo Cell / Photo Eye with Reflector
- Solar Panel 5 Watt 12 volt
- Wireless keypad RADIOKEYD 433 MHz
- VMD202 Vehicle Motion Detector
Apollo 1500 Kit $ 1,857.17
Apollo 1550 ETL Kit $ 2,390.06
|
|
|
|
318N Receiver
specifications:- Frequency
433.92 MHz
- Reception Frequency
52 Ohm
- Input Power
12-28 AC/DC
- Current Draw
15 Ma
- Decoding
Digital 52bit
- Channels
2
- Relay contact
Normally Open 0.5 A 50VAC
- Dimensions
3.8 x 1.6 x 0.9
APOLLO / NICE Receiver - 2 Channel, NICE - 433Mhz - Superior Range -- $54.00
320N Transmitter
specifications:- Frequency
433.92 MHz
- Estimated Range
500ft - 650ft
- Coding
Digital 52bit
- Dimensions
2.8 x 1.6 x 0.6
|
|
Era One
433.92 MHz rolling code transmitters with management of Identity Codes and Certificates, self-learning and built-in proximity receiver; with 72 bit O-Code encoding, also compatible with Nice Flor encoding receivers.
Evolved: uses data processing and recognition systems that increase its degree of security and deliver a threefold reduction in automation response times. Easy memorization using a transmitter already programmed in the receiver, thanks to the enabling code between the two
- 2 Button transmitter: ON2E
APOLLO / NICE Remote Control - 2 Button - 2 Channel Nice Transmitter -- $ 27.95
APOLLO / NICE Remote Control -4 Button - 4 Channel Nice Transmitter -- $37.50
|
|
Inti
433.92 MHz rolling code transmitters with management of Identity Codes and Certificates, self-learning and built-in proximity receiver; with 72 bit O-Code encoding, also compatible with Nice Flor encoding receivers.
Evolved: uses data processing and recognition systems that increase its degree of security and deliver a threefold reduction in automation response times. Easy memorization using a transmitter already programmed in the receiver, thanks to the enabling code between the two.
APOLLO / NICE Remote Control - 2 Button -2 Channel Nice Transmitter -- $ 19.95
Available colors:
INTI2/A - Black
INTI2B/A - Blue
INTI2G/A - Green
INTI2L/A - Lilac
INTI2R/A - Red
INTI2Y/A - Yellow |
|
PS-12330 12 Volt 33 Amp Hrs.
Features:
- Absorbent Glass Mat (AGM) technology for
superior performance.
- Valve regulated, spill-proof construction.
- Power/volume ratio yielding unrivaled
energy density.
- Rugged ABS plastic case and cover
- Approved for transport by air. D.O.T., I.A.T.A.,
- F.A.A. and C.A.B. certified.
- U.L. recognized under file number MH 20845.
PS-12330 12 Volt 33 Amp Hrs.-- $ 148.33
|
|
Deep Cycle
Product Specifications-
Dimensions:
Height (in.):9.4
- Item Weight (lbs.):49
- Length (in.):12.5
Width (in.):6.7
Design & Construction:-
Battery Design:Lead-Acid
- Maintenance:Maintenance Free
- Positive Terminal Side:Right
- Terminal Post Location:Top
Deep Cycle 75 Amp Hrs.-- $ 262.64
|
|
Apollo Automatic 1.5 Amp Battery Charger #404
Operating Instructions
Once the connection intructions have followed, the light Emitting Diode ( L.E.D ) light when A.C. Power is present. Red light at 12V charge mode, Yellow Light present at 6V charge mode, the yellow L.E.D light to indicate "Charging Mode" and that a proper connection to the battery has been made. The battery charges to approximately 14.4 Vdc at 12V switch selection, charges to 7.2 Vdc at 6V switch selection and then transitions into the "Float Mode" where the White L.E.D turns Green and the regulating voltage reduces to a lower level
Apollo Automatic 1-1/2 Amp Battery Charger (100 cycles or less per day) -- $59.14
|
|
Apollo Automatic 10 Amp Battery Charger #406
-
A state-of-the-art charger for boats and RVs with deep-cycle batteries
- Circuit-controlled and fully automatic mean never worrying about overcharging
- Also good for onshore charging needs
- Can also be switched to manual mode for special uses
- For conventional 12V batteries
- 10 amp fast charge for everyday charging needs
- Charges a deep-cycle battery in 7 to 11 hours and an automotive battery in 3 to 5 hours
- Fully automatic, will not overcharge batteries
- Manual operation
- Maintains charge
- LED full charge indicator
- Reverse hookup safeguard
- Convenient carrying handle
CSA-certified
Apollo Automatic 10 Amp Charger (100+ cycles per day) -- $96.43
|
|
Apollo Solar Panel (5 Watts)
DUTY CYCLES: The first thing to consider in a solar application is the number
of cycles per day that the gate is going to be expected to operate. Once the
number of cycles is determined, use the following equation to find the solar
requirements of a basic Apollo gate operator including the standard receiver. This
is a conservative equation estimating that for every 5 watts of solar a minimum of
10 cycles of power will be put into the battery.
Cycles / 2 = Watts of Solar
Example: if 35 cycles per day are needed…
35 / 2 = 17.5 watts
A minimum of 17.5 watts would be needed to handle the duty cycles of
this system.
APOLLO Solar Panel - 5 Watt with Mounting Bracket -- $99.95
|
|
Apollo Solar Panel (10 Watts)
DUTY CYCLES: The first thing to consider in a solar application is the number
of cycles per day that the gate is going to be expected to operate. Once the
number of cycles is determined, use the following equation to find the solar
requirements of a basic Apollo gate operator including the standard receiver. This
is a conservative equation estimating that for every 5 watts of solar a minimum of
10 cycles of power will be put into the battery.
Cycles / 2 = Watts of Solar
Example: if 35 cycles per day are needed…
35 / 2 = 17.5 watts
A minimum of 17.5 watts would be needed to handle the duty cycles of
this system.
APOLLO Solar Panel - 10 Watt with Mounting Bracket -- $194.30
|
|
Apollo Solar Panel (20 Watts)
DUTY CYCLES: The first thing to consider in a solar application is the number
of cycles per day that the gate is going to be expected to operate. Once the
number of cycles is determined, use the following equation to find the solar
requirements of a basic Apollo gate operator including the standard receiver. This
is a conservative equation estimating that for every 5 watts of solar a minimum of
10 cycles of power will be put into the battery.
Cycles / 2 = Watts of Solar
Example: if 35 cycles per day are needed…
35 / 2 = 17.5 watts
A minimum of 17.5 watts would be needed to handle the duty cycles of
this system.
APOLLO Solar Panel - 20 Watt with Mounting Bracket -- $428.20
|
|
