LiftMaster SW490 50 1/2HP Industrial Commercial Swing Gate Operator Openers
		Liftmaster SW490 offers powerful performance for high cylce and heavy industrial swing gate door applications. This hefty design supports gate lengths up to 22 feet and gate weights up to 1,000 pounds. Utilizing a weather-resistant powder-coated steel enclosure, a worm gear reduction drive, and high-starting torque motor, the SW490 offers you years of reliable and powerful performance. This model is ideal for demanding industrial applications and is fully UL325-compliant.  Manual GL Board  Spec Sheet  Manual S3 Board   Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here

LiftMaster SW490 - 50-11 Industrial Swing Gate Opener / Operator 1/2hp 115V 1-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

LiftMaster SW490 - 50-21 Industrial Swing Gate Opener / Operator 1/2hp 230V 1-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

LiftMaster SW490 - 50-23 Industrial Swing Gate Opener / Operator 1/2hp 230V 3-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

LiftMaster SW490 - 50-43 Industrial Swing Gate Opener / Operator 1/2hp 460V 3-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

LiftMaster SW490 - 50-53 Industrial Swing Gate Opener / Operator 1/2hp 575V 3-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

LiftMaster SW490 - 50-81 Industrial Swing Gate Opener / Operator 1/2hp 208V 1-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

LiftMaster SW490 - 50-83 Industrial Swing Gate Opener / Operator 1/2hp 208V 3-Phase -- Add To Cart For Special Pricing - To Low To Advertise
 

Gate logic board provides many enhanced and exclusive features
- Fully Adjustable Inherent Obstruction Detection System
- Advanced Dual Gate Operation
- Sequenced Access Management (SAM) System
- Shadow Loop Input
- Industrial Surge and Spike Protection
- Digital Logic Control Allowing for Long Control Lines of Over 1,000 Feet
- Separate Open and Close External Sensor Inputs
- 17 LEDs to Ease Installation and Speed Diagnostics

Specifications
Operator speed - 90 degree swing in 12 seconds
Power
115/208/230 VAC, Single phase - 60 Hz
208/230/460/575, Three phase - 60 Hz
Overall dimensions - 18.5" H x 26.25" L x 18.5" W
Operator weight - 200 pounds
Accessory power - One 24 VAC
UL listed - UL991, UL325 Class I, II, III, IV
Construction:
Gear reduction: 30:1 wormgear in oil
Motor: 1/2 to 1 HP high-starting torque motor
Metal frame: Pre-galvanized steel
Enclosure: Weather resistant 14-gauge pre-galvanized steel
Optional equipment:
- self-regulating heaters
- quick-release manual
- disconnect system

Standard Features
-  Inherent obstruction sensing - This unit's internal obstruction sensing system offers a single force
adjustment for both the open and closed directions. If the gate strikes an obstruction, a closing gate will
reverse to open and an opening gate will reverse to close.
-  External obstruction sensing - Input connections are provided for external contact and non-contact sensors,
such as photo eyes and edge devices.
-  Advanced dual gate operation - This convenient 2-wire system allows the operation of 2 separate gate
operators in unison at a single entrance. This advanced system provides the added convenience of
connecting accessories to either operator.
-  Sequenced access management - The Sequenced Access Management (SAM) system provides the capability
to sequentially control the operator in tandem with a barrier gate.
-  Digital logic control - Supports long-distance control wiring runs of over 1,000 feet, providing you greater
flexibility of gate operator site placement.
-  LED indicators - Operator input, status and diagnostic LEDs simplify setup and troubleshooting.
-  Warning device -  UL325-compliant entrapment warning alarm has the ability to be set for pre-operation
warning. This will provide a 3-second warning prior to and during gate movement.
-  Loop detector inputs - A full range of inputs are available to support exit, shadow and interrupt loop
detectors.
-  Timer to close - Adjustable timer can be set from 1 to 180 seconds. The unit will automatically reset upon
receiving any additional open commands.
-  Maximum run timer - Protects against damage to the gate and operator by limiting the unit's run time to 120
seconds.
-  Emergency stop button - This 1-button station will halt movement of the operator in an emergency situation
and comes standard in an outdoor weather - tight enclosure.
-  Maglock control - A dedicated control relay is provided to activate and deactivate an optional magnetic lock
for securing the gate.
-  Gear drive reduction - The wormgear 30-to-1 reduction unit is saturated in an oil bath for strong fluid motion
of the operator.
-  Control inputs - Control inputs allow the connection of a full range of optional external devices like loop
detectors, telephone entry systems, access control systems and radio receivers.
-  Limit settings - All driven limit cams are fully adjustable, adding considerable convenience to unit installation
and maintenance.
-  Surge & spike protection - Specially designed circuitry provides excellent protection from external spikes or
surges.
-  Manual disconnect - Ensures that manual operation is possible during emergencies and maintenance work.
-  Removable access control panel - A removable access door is incorporated into the design to provide easy
access to the electronics when programming.