|
Linear AM-KP: Exterior Keypad
NO LONGER AVAILABLE
Linear AM-KP Remote Exterior Keypad
This wired keypad (Linear AM-KP) is an outdoor entry device that activates one relay channel.When a learned one-to-eight-
digit access code is entered, the Linear AM-KP causes a Linear access controller to activate one of its four relays, which in turn,
performs an action, such as releasing a door strike/magnetic lock or triggering a gate operator.
The keypad is built for extended service in tough commercial access control environments, outdoors or inside. It is housed
in a weather-resistant, cast aluminum case.A built-in piezo sounder provides audible confirmation to the user when a key is
pressed.A red LED indicates “power” and switches to green when a valid entry code is entered.A separate yellow LED
illuminates when the keypad is locked out. Lockout can be programmed to occur after one to seven unsuccessful entry
code attempts and will remain in that condition for one full minute.
A built-in downlight provides keypad illumination in even the darkest conditions. It is completely programmable: on all the
time or timed intervals.The keypad is powered by a system controller and can be located up to 500 feet away.A local
external 12 Vdc power supply is also available.A keylock secures the keypad to the mounting backplate.
General Specifications
Materials: cast aluminum housing with stainless steel faceplate and keys
Colors: black housing, stainless steel faceplate and keys, yellow keypad lettering
Size: 4 in L x 3 in W x 5.25 in H (102 x 76 x 133 mm)
Mounting: backplate secured to keypad via keylock
Wiring: six-wire cable
Operating Temperature: -22° to +155°F (-30° to +70°C)
Wiring: up to 300 feet, BELDEN 9931 (24 AWG); up to
500 feet,WEICO 9405 or equivalent (20 AWG)
For use outdoors or indoors
1-to-8-digit user selectable access codes
Programmable downlighting
Separate LEDs for "power/access granted" and "locked out" indication
Pedestal or wall mounting
Cast aluminum, environmentally protected housing
Keylock secures keypad to mounting backplate
4" W x 5.5" H x 3" D
Product Number: ACO00520 |
