FAAC 402 CBC 115V OR 230V Operator Only Slave unit - No Control Panel
		FAAC 402 hydraulic swing gate opener are designed for private residences. They offer many of the benefits of a large gate operator in a compact form. The FAAC 402 Opener is an automatic gate operator for a swinging gate leaf. It can accommodate a gate leaf of up to 900 lb (410 kg) and up to 10 ft (3 m) in length. The FAAC 402 hydraulic system can hydraulically lock the gate in your choice of the opened or closed positions. The FAAC 402 system can hydraulically lock the gate in your choice of the opened and/or closed positions. Both models have versions that allow your gate system be set up to provide special options including “gate-safe” or “ gate-secure” configurations:  Spec Sheet  402 with 450 MPS Control Panel Manual  402 with 455 MPS Control Panel Manual Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here

FAAC 402 CBC Stanard Operator Only 115V- Only Use to make single unit into Master/Slave (Bi-Parting) Kit or use to order replacement operator -- $ 902.46

FAAC 402 CBC Stanard Basic Single Operator Kit 115V- Includes 402 CBC Operator, 455D Control Panel, 14"" X 16"" Pre-Wired Enclosure" -- $ 1,768.9
 

FAAC 402 CBC Stanard Basic Single Operator Kit 230v -- $ 1,768.91
 

FAAC 402 CBC Stanard Operator Only 230V -- $ 902.46
 

FAAC 402 Hydraulic and Electromechanical Swing Gate Operators
FAAC 402 hydraulic swing automatic gate operators are designed for private residences. They offer many of the benefits of a large gate operator in a compact form.  

Model 402 Kits include
One or two hydraulic gate operators with mounting hardware
One 455 D control panel
One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
One or two manual release keys
One plug-in radio receiver
Two radio transmitters
115 VAC receptacle for accessories (5 amp max.)
ON/OFF switch controlling power to control panel, accessories and plug outlet
Large pre-wired terminals for easy wiring to control panel
Test button
Two or four warning signs

FAAC 402 Hydraulic and Electromechanical Swing Gate Operators
Hydraulic swing gate operators are inherently safer than other types of operators because they have fewer
“pinch points.” In addition, FAAC 402 operators are equipped with a hydraulic bypass valve for extra
entrapment protection and a manual release that allows you to operate your gate if there is a power failure. A battery back-up unit is also available. The 402 hydraulic system can hydraulically lock the gate in your choice of the opened or closed positions.

FAAC 402 Specifications:
Parameter Standard Standard
Application Single family residence, single leaf or bi-parting gate (vehicles only, not for pedestrian use) (not recommended for solid gates)
Cycles per hour 30
Maximum gate Swing 90 degrees
90 degree opening time 12 seconds
Maximum weight per gate leaf 900 pounds
Maximum length per gate leaf 10 feet (3 m)
Approx. operating temperature range -33oF to 165oF (-36oC to 74oC)(For extreme temperature conditions,
arctic grade fluid is available upon request)
Hydraulic locking Available in opened or closed positions
Voltage 115 VAC (2.5 A) or 230 VAC (1.5 A)