LiftMaster SW470 Openers, Liftmaster Commercial Swing Gate Operators
		The Opener SW470 is a heavy-duty commercial swing gate operator for use in high-cycle applications such as gated communities and commercial access. Supporting door gate lengths up to 12 feet, gate weights up to 500 pounds and utilizing a weather-resistant powder-coated steel enclosure, the SW470 ensures rugged and reliable performance. This model is ideal for commercial applications and is fully UL325-compliant.    Manual with GL Board  Spec Sheet  Manual With S3 Board Click Here For Replacement Parts Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here

LiftMaster SW470 Commercial Swing Gate Opener / Operator -- Add To Cart For Special Pricing - To Low To Advertise

LiftMaster SW470 Commercial Swing Gate Operator

The LiftMaster® SW470 is a heavy-duty commercial swing gate operator for use in high-cycle
applications such as gated communities and commercial access. Supporting gate lengths up to 12
feet, gate weights up to 500 pounds and utilizing a weather-resistant powder-coated steel
enclosure, the SW470 ensures rugged and reliable performance. This model is ideal for
commercial applications and is fully UL325-compliant.

Gate logic board provides many enhanced and exclusive features
- Fully Adjustable Inherent Obstruction Detection System
- Advanced Dual Gate Operation
- Sequenced Access Management (SAM) System
- Shadow Loop Input
- Industrial Surge and Spike Protection
- Digital Logic Control Allowing for Long Control Lines of Over 1,000 Feet
- Separate Open and Close External Sensor Inputs
- 17 LEDs to Ease Installation and Speed Diagnostics

Specifications
Operator speed - 90 degree swing in 12 seconds
Power - 115/230 VAC, Single phase - 60 Hz
Operator weight - 110 pounds
Accessory power - One 24 VAC
UL listed - UL991, UL325 Class I, II, III, IV
Construction:
Gear reduction: 30:1 wormgear in oil
Motor: 1/2 high-starting torque motor
Metal frame: Pre-galvanized steel
Enclosure: Weather resistant 14-gauge pre-galvanized steel
Optional equipment:
- Self-Regulating Heater

Standard Features
-  inherent obstruction sensing - This unit's internal obstruction sensing system offers a single
force adjustment for both the open and closed directions. If the gate strikes an obstruction, a
closing gate will reverse to open and an opening gate will reverse to close.
-  external obstruction sensing - Input connections are provided for external contact and
non-contact sensors, such as photo eyes and edge devices.
-  advanced dual gate operation - This convenient 2-wire system allows the operation of 2
separate gate operators in unison at a single entrance. This advanced system provides the
added convenience of connecting accessories to either operator.
-  sequenced access management - The sequenced access management (SAM) system provides
the capability to sequentially control the operator in tandem with a barrier gate.
-  digital logic control - Supports long-distance control wiring runs of over 1,000 feet, providing
you greater flexibility of gate operator site placement.
-  LED indicators - Operator input, status and diagnostic LEDs simplify setup and troubleshooting.
warning device
-  UL325-compliant entrapment warning alarm has the ability to be set for pre-operation warning.
This will provide a 3-second warning prior to and during gate movement.
-  loop detector inputs - A full range of inputs are available to support exit, shadow and interrupt
loop detectors.
-  timer to close - Adjustable timer can be set from 1 to 180 seconds. The unit will automatically
reset upon receiving any additional open commands.
-  maximum run timer - Protects against damage to the gate and operator by limiting the unit's run
time to 120 seconds.
-  emergency stop button - This one-button station will halt movement of the operator in an
emergency situation and comes standard in an outdoor weather- tight enclosure.
-  maglock control - A dedicated control relay is provided to activate and deactivate an optional
magnetic lock for securing the gate.
-  gear drive reduction - The wormgear 30-to-1 reduction unit is saturated in an oil bath for strong
fluid motion of the operator.
-  control inputs - Control inputs allow the connection of a full range of optional external devices
like loop detectors, telephone entry systems, access control systems and radio receivers.
-  limit settings - All driven limit cams are fully adjustable, adding considerable convenience to
unit installation and maintenance.
-  surge & spike protection - Specially designed circuitry provides excellent protection from
external spikes or surges.
-  manual disconnect - Ensures that manual operation is possible during emergencies and
maintenance work.
-  removable access control panel - A removable access door is incorporated into the design to
provide easy access to the electronics when programming and for maintenance.

Options
G305803002 Post mount kit       
86LM Remote Antenna Mounting Kit - For use with 312HM in remote locations. Kit contains antenna bracket and 15'
of cable       G6518300 Thermostat Control Heater (115V + 575V)        
G6519084 Thermostat Control Heater (208V-160V)     

370LM  LiftMaster 370LM mini 3-button remote control       
371LM  LiftMaster 371LM 1-button remote control         
372LM  LiftMaster 372LM 2-button remote control        
373LM  LiftMaster 373LM 3-button remote control