FAAC 820 Automatic Sliding Gate Operators-FAAC 820 Commercial Operator
Manual		The FAAC 820 Slide Gate Operators are compact with GentleSlide Motion Management for high-traffic applications. The FAAC 820 is designed for medium-weight gates, and the 860 is designed for heavier gates. Either operator is available with a chain drive or a rack and pinion drive. The FAAC 820 operator feature internal limit switches for gate leaves up to 59 ft (18 m) in length. The motor for the FAAC 820 or FAAC 860 Operator serves as a gate lock. For further reliability, the motor's armature shaft is mounted on double bearings. The worm drive mechanism and single-plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation. Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here FAAC 820 Chain Slide Gate Operator - Includes 230 VAC Operator, 826 MPS Control Panel, 16 or 20 tooth sprocket, idlers and protective cover, leveling hardware, chain-to-gate mounting hardware with nickel plated master links. (Chain Not Included) --NO LONGER AVAILABLE FAAC 820 Rack and Pinion Slide Gate Operator - Includes 230 VAC Operator, 826 MPS Control Panel, 20 tooth pinion, and leveling hardware. (Rack not Included) --NO LONGER AVAILABLE

FAAC 820 Slide Gate Operator
The 820 Slide Gate Operators are compact operators with Gentle-Slide Motion Management for high-traffic applications. The 820 is designed for medium-weight gates, and the 860 is designed for heavier gates. Either operator is available with a chain drive or a rack and pinion drive. Both operators feature internal limit switches for gate leaves up to 59 ft (18 m) in length.  The operators also feature internal cooling systems, interchangeable gears for various sized gates and gate speeds, and a partial opening function. The new partial opening function allows you to open the gate just enough for motorcycle traffic, for example, without compromising your security.
Each operator has a die-cast anodized aluminum housing and a die-cast aluminum cover protected by polyester paint. Those mechanical components requiring extra strength are made of steel or cast iron. The motor for the 820 Operator serves as a gate lock.

For further reliability, the motor's armature shaft is mounted on double bearings. The worm drive mechanism and single-plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation. Inside the operator's housing you will find that the transformer, capacitor, and analog-digital limit switch module are separate from the main control panel board for easy maintenance (see Figure 2). In addition, the control panel provides quick-connector ports.
The 826 MPS control panel inside the 820 Operator offers you choices in gate leaf functions. For example, you can choose among eight different logical modes of operation. You can also select the pause time you want (from 5 to 180 sec, depending on logic mode), the direction in which the gate slides, and the operationof the warning light as the gate leaf closes. The control panel also accepts a wide range of product accessories and reversing devices to allow you the maximum flexibility in designing your gate system.
One feature of FAAC's slide gate operators is the adjustable internal limit switch function. By setting the operator to recognize the fully closed and fully opened positions of the gate leaf's travel, you also enable the operator to automatically brake the gate leaf before it reaches the end of its travel in either direction, thus causing less stress on your gate leaf.

FAAC 820 Slide Gate Operators
Choices for 820 installation kits:
Installation kits with pedestal for CHAIN DRIVEN operators 3501* and 35S1*
* 30' nickel plated chain (kit 35S1 has stainless steel chain)
* Mounting pedestal
* 8" x 10" x 5.5" NEMA 4 fiberglass enclosure with backplate and power switch
* Hardware set for enclosure to pedestal attachment
* 2 sets of conduit and connectors for connecting enclosure to operator
* 2 caution signs

Installation kits with pedestal for RACK AND PINION operators 3503*
* 23' gear rack
* Mounting pedestal
* 8" x 10" x 5.5" NEMA 4 fiberglass enclosure with backplate and power switch
* Hardware set for enclosure to pedestal attachment
* 2 sets of conduit and connectors for connecting enclosure to operator
* 2 caution signs

Microprocessor Control for 820 Choose from 8 operating modes:
* 2 kinds of garage-door-like logic (signal to open, signal to close)
* 2 kinds of automatic logic (signal to open, then close after a selectable time period)
* 2 kinds of security logic (for anti-tailgating)
* 2 kinds of logic for an attended gate