OSCO GSLG-A 211 Sliding Gate Operator, OSCO GSLG-A 221 Slide Gate Operator, Commercial Slide Gate Operator
|
|
 |
Now Includes APeX Controller!
GSLG-A SERIES - Industrial / commercial slide gate operator series, available in 1/2, 3/4, and 1 horsepower, various supply voltages and phases, 12" per second gate speed.
 Manual
Spec Sheet
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
Linear - OSCO GSLG-A-211- 1/2 HP 115 Volt/ SingleCommerical Slide Gate Operator -- $3,295.00
 
Linear - OSCO GSLG-A-221- 1/2 HP 230 Volt / Single Commerical Slide Gate Operator -- $3,295.00
Ratings
- Maximum duty cycle: Continuous
Features
- Integral APeX Controller
- Direct motor to gear reducer drive
- C-face brake
- #50 roller chain
- 1/2, 3/4, or 1 HP motor
- All voltages, single or three-phase
- Emergency manual disconnect handle
- Powder coat finish
- Post mount standard; pad mount optional
Electrical
- 1/2, 3/4, or 1 HP, 115 or 230 VAC, single phase, thermally protected, heavy-duty PSC motor
- 1/2, 3/4, or 1 HP, 230 or 460 VAC, three-phase heavy-duty motor
- Double C-face brake
- Power on/off switch
- Emergency stop/reset button on front cover
- Duplex receptacle on 115 VAC units
- On-board APeX Controller three-button control station
- AC and DC power available for access control accessories and reversing devices
- All accessory connections 24 VDC
- Easily adjustable rotary limit switches
Mechanical
- Heavy-duty 15:1 right-angle C-face gear reducer
- #50 roller drive chain and sprockets
- Adjustable torque limiter
- Heavy-duty pillow-block bearings
Factory Options
- Optional pad mount pedestal
- Optional thermostatically-controlled strip heater
Warranty
GSLG-A SERIES Models
| MODEL |
HP |
VOLTAGE &
PHASE |
MAXIMUM GATE
WEIGHT |
MAXIMUM GATE
LENGTH |
| GSLG-A-211 |
1/2 |
115 Single-Phase |
1100 LBS. |
45 FT. |
| GSLG-A-221 |
230 Single-Phase |
|
