FAAC 844 Industrial Sliding Gate Opener - FAAC 844 Commercial Opener
		The FAAC 844 Compact Slide Gate Opener is available in a rack and pinion or a chain model. It comes as a package containing the drive unit and electronic separately. The electronic control panel installed in the cover of the 844 Operator is a microprocessor-based controller that accepts a full range of product accessories and  reversing devices to allow the maximum flexibility in designing the gate system. The advanced design of the opener features a small, self-contained unit composed of an electric motor with a built-in clutch and a reduction gear box, both housed in a die-cast aluminum casing. The motor drives the rack or chain to slide the gate.  FAAC 844 Manual  844 with 780D Control Panel Manual Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. Compatible photo cell More Information here FAAC 844 Chain Slide Gate Operator - Includes 120 VAC Operators 780D Control Panel, 16 or 20 tooth sprocket, protective cover, limit switch plates, mounting angle brackets, chain-to-gate mounting hardware with nickelplated master links. (Chain not Included)" -- $ 1,679.74   FAAC 844 Rack and Pinion Slide Gate Operator - Includes 120 VAC Operator, 780D Control Panel, 20 tooth pinion, mounting angle brackets and limit switch plates." -- $ 1,679.74

MODEL 844 CHAIN KITS INCLUDE:
Opener
Control panel (844 MPS)
Sprocket
Idlers and protective cover
Easy install limit switch plates
Mounting angle brackets
Chain-to-gate mounting
hardware with nickel plated
master links
Chain is not included

MODEL 844 RACK & PINION KITS INCLUDE:
Opener
Control panel (844 MPS)
Pinion
Mounting angle bracket
Limit Switch plates

FAAC 844 Slide Gate Opener
Features
* 230 VAC
* External limits
* Manual release (non-keyed)
* "Soft Stop" on opening and closing
* 3/4 hp motor
* Oil immersed clutch which, when properly adjusted , limits the amount of pressure the operator can apply to moving gate
* Duty Cycle: 30% motor run time
* Microprocessor Control:
Choose from 4 operating models:
*signal to open, signal to close
* automatic logic
* security logic
* 2 security logic

FAAC 844 Slide Gate Opener
The FAAC 844 Compact Slide Gate Opener is available in a rack and pinion or a chain model. The operator comes as a package containing the drive unit and electronic control panel. All external reversing devices and other accessories must be ordered separately.
The electronic control panel installed in the cover of the 844 Operator is a microprocessor-based controller that accepts a full range of product accessories and reversing devices to allow the maximum flexibility in designing the gate system. The advanced design of the operator features a small, self-contained unit composed of an electric motor with a built-in clutch and a reduction gear box, both housed in a die-cast aluminum casing. The motor drives the rack or chain to slide the gate.
An adjustable friction clutch is located on the input side of the gear box so that when torque exceeds a preset value, the drive torque on the output shaft remains at a constant level. The holding power of the gear mechanism ensures that the gate stays perfectly shut. There is no need to fit an additional lock on the gate. The electric motor, two-disc clutch, and reduction gear are completely immersed in oil that lubricates the moving parts and
also dissipates heat generated during operation. The heat is dissipated through the outer casing of black anodized aluminum. The Manual Release mechanism, a key- and lever operated device, allows you to open or close the gate by hand whenever the need arises. The Manual Release mechanism is useful, for example, when the electrical power goes out and
you want to open or close the gate.
A limit switch assembly stops the drive motor when the limit switch plates mounted on the rack or chain are sensed. The limit switch is inductive and watertight to increase its reliability and functionality. The adjustable electronic braking system insures that the gate stops exactly where and when required.