FAAC 390 Low Voltage Swing Gate Operators Dual Kit-FAAC 390 Swing Gate Operator
|
|
 |
FAAC 390 Swing Gate Operators
Applications: Single family residence, single leaf or bi-parting gate
(vehicles only, not for pedestrian use)
Duty cycle: 100%
Maximum gate swing 120 degrees
90 degree opening time 13 seconds
Maximum . weight per gate leaf 400 pounds (181.4 kg)
Maximum length per gate leaf 10 feet (3 m)
Approx. operating temperature range -4°F to131°F (-20°C to 5°C)
Voltage Primary: 115 VAC
Secondary: 24 VDC (100va transformer)
Absorbed power 40 W
Current 2 A
Protection class Nema 4x
EO24U Control Panel
Batteries (2 required) 7.5 amp hour, 12v
 Spec Sheet
FAAC 390 with 425 MPS Control Panel Manual
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
|
FAAC 390 Basic Double Gate Operator Kit- Includes (2) 24VDC Operators, EO24U Control Panel, 14x16 in. Enclosure, Transformer Batteries (2), and 2 Limit Switches." -- $ 2,594.90
 
FAAC 390 Basic Single Gate Operator Kit- Includes 24VDC Operator, EO24U Control Panel, 14x16 in. Enclosure, Transformer Batteries (2), and 2 Limit Switches." -- $ 1,682.70
FAAC 390 Operator Only - Use to make single unit into Master/Slave (Bi-Parting) Kit or use to order replacement operator. Order necessary five wire cable and 2 limit switches. -- $ 912.30
FAAC 390 Low Voltage Electro-Mechanical Swing
Gate Operators
FAAC 390 24v Operator is an automatic swing gate operator for a
residential swinging gate leaf that is ideal for large columns. The self-
contained 390 24v swing Operator consists of a irreversible
electromechanical motor and articulated arm. The locking the 390 24v
swing gate Operator provides in the fully opened and fully closed
positions is a service device rather than a security device. Additional,
external locks are recommended under the following conditions: ∗ It is
a solid-faced gate. ∗ The length of the gate leaf is 6 ft (2 m) or longer.
∗ The installation requires tight security. ∗ The site is subject to
vandalism. ∗ The site is subject to strong or very gusty wind
In two-operator gate installations, both (master/slave) operators are
wired to one control panel. The electronic control panel is a
microprocessor-based controller that accepts a wide range of product
accessories and reversing devices, thus allowing for flexible gate
system design
|
