Q-SEAL 290S Loop Sealant, Concrete Grey
|
 |
 |
Professional 1 part driveway loop sealant in 30 oz. tube
Product Details:
• 30 oz. tube, for use with asphalt (black) or concrete ( grey) driveways.
• Q-SEAL 290S Detector Loop Sealant is a one component thixotropic moisture curing polyurethane sealant, for use in both asphalt and concrete pavement to provide a weather and chemical resistant waterproof seal.
• One tube will cover two 4-ft x 6-ft loop cuts.
 Sealant Info
Loop Sealant - Q-SEAL 290S Loop Sealant, Concrete Gray -- $24.95
|
DESCRIPTION:
Q-SEAL 290 detector loop sealant is a one-part self-leveling chemically curing rubber sealant. It is designed for use in both asphalt and concrete pavements to provide a weather and chemical resistant waterproof seal.
USES:
Q-SEAL 290 was designed specifically for sealing vehicle detection loops at signalized intersections, actuated vehicle gates and overhead doors.
PACKAGING:
Q-SEAL 290 is packaged in easy to use quart caulking cartridges, 12 cartridges per case. Each cartridge contains 30-fl. oz. of sealant. One cartridge can easily handle an entire
3’ X 6’ loop. Each cartridge has a special flat nozzle designed to fit down into the loop slot allowing you to fill from the bottom up.
SHELF LIFE:
Sealant may be stored for up to one year from the manufactured date that is printed along with the batch number on each case.
CURING:
Q-SEAL 290 will skin over in approx. 3 hours at 77ºF and 50% R. H. At temperatures below 77ºF this product will take a proportionately longer time to cure. At temperatures above 77ºF it will take a proportionately shorter time to cure. Fill loop slot to within 1/4” of the road surface to prevent pick-up and tacking.
|
