Powermaster CGH Operator
|
Wiring Diagrams
|
 |
Model "CGH" Center Mounted Gearhead
Supply PowerMaster model "CGH" Industrial Duty Hoist
type operator rated ______HP, ____VOLTS, ____
PHASE, for use on Sectional Doors requiring high speed
manual operation in case of power failure.
Primary speed reduction shall be by means of an
industrial gear box with bronze worm gear in an oil bath.
Motor shall be of the high starting torque, continuous duty
industrial type, protected from overload by a current
sensing or thermal type overload device. Motor controller
shall be a heavy duty, full voltage, across the line,
magnetic reversing contactor, that is mechanically and
electrically interlocked. Electrical components shall be
installed in a NEMA 1 enclosure integral to the operator. A
transformer shall be provided to reduce control voltage to
24 VAC. Separate terminal strips shall be provided for
connection of power supply line and all control devices.
Operator shall be wired for an Open/Close/Stop control
station.
 Installation Manual
Spec Sheet
|
Control circuit shall provide instant reverse motor wiring
on 1Ø operators. Positive chain driven, rotary type limit
switches shall be provided to limit full open and close
travel of door. Limit switch adjustment shall not be
affected by removal of motor or by manual operation of
door. A floor level manual hoist chain shall be provided for
emergency operation of door. An electrical interlock
switch shall be provided to disable control circuit while
manual hoist chain is engaged. Final drive chain shall be
a #50 or larger roller chain. Operator shall be capable of
center mounting, or right or left hand mounting in either a
vertical or horizontal position.
Electrical Specifications:
- High Starting Torque Motor w/full overload protection
- Solid State Circuitry with Power and Program Feedback LED’s
- On Board Open/Close/Stop buttons for service and adjustments
- Terminals labeled and grouped by function
- Auto-Detect monitored photo beam for simplified installation
- Selectable Operating modes B2, C2, D1, E2, T, TS
- Field adjustable built in functions including: timer to close, mid-stop, delay on reverse, lock bar sensing, maximum run time, etc.
Mechanical Specifications:
- For Use on Sectional Doors
- Heavy Duty Worm Gear Reduction and Solenoid Brake
- Heavy Duty #50 Roller Chain and Driven Sprocket for Final Drive Included
- Adjustable Torque Limiting Clutch
- Positive Chain Driven Rotary Limit Switches
- High Speed Disconnect (For Manual Operation in case of power failure)
- Baked on Grey Powder Coat finish
| Description |
Part Number |
Price |
| PowerMaster CGH-51, 1/2 HP, 115V, 1 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-51 |
Our Price: $1,854.30
 |
| PowerMaster CGH-52, 1/2 HP, 208V /230V , 1 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-52 |
Our Price: $1,868.85
|
| PowerMaster CGH-53, 1/2 HP, 208V /230V , 3 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-53 |
Our Price: $1,889.62
|
| PowerMaster CGH-54, 1/2 HP, 460V , 3 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-54 |
Our Price: $1,917.41
|
| PowerMaster CGH-71, 3/4 HP, 115V, 1 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-71 |
Our Price: $2,207.50
|
| PowerMaster CGH-72, 3/4 HP, 208V /230V , 1 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-72 |
Our Price: $2,207.50
|
| PowerMaster CGH-73, 3/4 HP, 208V /230V , 3 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-73 |
Our Price: $2,228.28
|
| PowerMaster CGH-74, 3/4 HP, 460V , 3 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-74 |
Our Price: $2,228.28
|
| PowerMaster CGH-101, 1 HP, 115V, 1 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-101 |
Our Price: $2,249.06
|
| PowerMaster CGH-102, 1 HP, 208V /230V , 1 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-102 |
Our Price: $2,249.06
|
| PowerMaster CGH-103, 1 HP, 208V /230V , 3 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-103 |
Our Price: $2,269.83
|
| PowerMaster CGH-104, 1 HP, 460V , 3 Phase, Industrial Duty Hoist Center Mounted Gearhead |
CGH-104, |
Our Price: $2,269.83
|
|
