Linear AM-RRR Remote Radio Receiver
|
|
 |
The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems.
The AM-RRR functions as a remote device that extends the radio range or supplies localized radio
reception.
Linear AM-RRR: Remote Radio Receiver
$165.93
 
 Manual
|
The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems. The
AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.
Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to
the antenna. The local whip antenna (supplied) screws directly on to the receiver's connector. The directional
(EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver's antenna connector with type
RG-59 cable.
An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the maximum
radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The
two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when
access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be
used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the
incoming signals.
The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and
a weather-tight wiring strain relief seal the unit from the elements.
Features
Provides extended range for radio-based access control system
Up to 500 foot radius radio coverage
Weather-resistant housing for outside or indoor mounting
Optional directional remote or omnidirectional remote antennas
Integral radio gain control for adjustment of radio range
2-color status LEDs indicates "power on" and "access granted"
Radio LED detects transmission
Power supplied by access controller
Low voltage cable allows remote mounting without signal loss
RF frequency: 318 MHz
4.25" W x 6.25" H x 2.5" D (without antenna)
Product Number: ACP00500
|
