EMX Mini Infra-Red Eye BP-10 |
|
 |
The EMX BP 10 mini infrared eye has 160 foot range along with advanced
controls and indicators.
FEATURES
• Stainless steel housing.
• Wide variety of transmitter and receiver packaging and output options.
• IP67 rating
• A supply voltage of 10V to 30V DC, 24V AC, 115V AC
 Data Sheet
| EMX Mini Infra-Red Eye BP 10 12V -- $150.00 ( Discountinued ) |
 |
| EMX Mini Infra-Red Eye BP 10 24V -- $150.00 ( Discountinued ) |
|
|
EMX Mini Infra-Red Eye, EMX BP-10
DOOR TRAFFIC CONTROL
The small size of the BP 10 transmitter and receiver lenses make them an ideal choice for installations where the
customer does not want noticeable sensors. The IP65 rating allows for installation in area that might receive some rain or
water splash. The BP 10 may be used for door sensing, reversing, counting, alarm entry and many other applications
acceptable to infrared sensing.
EMX Mini Infra-Red Eye, EMX BP-10
ORDERING INFORMATION
BP 1012 12 Volt AC/DC with single transmitter and receiver 1 relay NC/COM/NO output
BP 1024 24 Volt AC/DC with single transmitter and receiver 1 relay NC/COM/NO output
Also available with dual transmitter/receiver with single relay output and dual transmitter/receiver with 2 relay outputs.
EMX Mini Infra-Red Eye, EMX BP-10
TECHNICAL INFORMATION
Available Single Beam Selection
Switching Distance 33 Ft. / 10 m
Emission (875 nm) Infrared
Nominal Voltage 12 or 24 V AC/DC (10%)
Frequency 50 – 60 Hz
Output NO / COM / NC Relay
Relay Contact Rating 1A 24VDC - 0.5A 120VAC
Current Draw 70 mA
Yellow LED Detect Indicator LED
Green LED Power Indicator LED
Sensitivity Adjustment Yes
Switching Frequency 5 Hz
Response Time 200 mS
Start up Delay < 300 mS
Temperature Range -20C - +60C
Light Immunity 5000 Lux
Protection Rating Amp IP 54
Protection Rating TX/RX IP 65
Connection Terminal Block
Housing Material Amp ABS
Housing TX/RX Methacrylate
Weight (Approximately) |
