|
 |
DOLKPL1KB Keypad Garage Door Gate Opener Control Entry System
The DOLKPL1KB is a self-contained three relay outputs, vandal resistant and weatherproof keypad. It can work independently as a stand alone keypad or works together with an optional “Transmitter Solutions controller” to form a high security split-decoded keypad system. It also provides 34 bits Wiegand data output from the entry of an PIN/code. The Wiegand data can be used by consultants and end users when setting product design or system installation criteria.
The keypad unit comes with plenty of functions for owner’s selection via programming. Owners can take them freely to tailor the desired features for their system. It is an ideal keypad mainly for Door Strike and Alarm Armdisarm control. It is also a programmable industrial timer (with the timing of 1 second to over 24 hours) for Automatic Operator systems.
Keypad - DOLKPL1KB - Wire Post Mount Keypad -- $ 159.95
 
|
DOLKPL1KB - Wireless, Post Mount Keypad
The DOLKPL1KB is designed for surface mounting on wall or on a mounting post.
- A member of the keypads compatible with the optional Transmitter Solutions Access Controller
- Indoor or outdoor installation
- Stand Alone or Inter-lock system built-in with all the required control logics
- Controls “Going in” with User PIN; and “Going out” with programmable egress button
- Durable Steel housing for surface or gooseneck mounting (DOLKPL1KB)
- Built-in Tamper Switch
- Heavy duty .05 inch stainless steel faceplate
- Die-casting metal back-lit keyboard with dual brightness levels
- Vandal resistant and weatherproof (IP-66)
- Data I/O port for Up-grading the system to Split-decoded operation with the optional “Transmitter Solutions Controller”
- 34 bit Wiegand data output on PIN / code entry
- Three outputs controlled by independent groups of codes / PINs
- Programmable Timers for Door Strike, Alarm Arm-disarm Control or Industrial Automatic Operators
S P E C I F I C A T I O N S
- Operating Voltage:
12V-24V DC, Auto adjusting
-
Operating Current:
40mA (quiescent) to 100mA (three relays active)
-
Operation Temperature:
-4 F to 158 F
-
Environmental Humidity:
5-95% relative humidity non-condensing
-
Working Environment & Ingress Protection:
All weather, IP-66
-
Number of Users:
-
Output 1 – 1,000 User PINs + 50 Duress Codes
-
Output 2 – 100 User PINs + 10 Duress Codes
-
Output 3 – 100 User PINs + 10 Duress Codes
-
Number of Visitor Codes:
50, programmable for one time or with the time limit
-
Timings for Code Entry:
10 seconds waiting for next digit entry
-
The Timers:
Three 1-99,999 Seconds (Over 24 Hours possible) Independent Programmable Timers for O/P 1, 2 & 3
-
Egress Button:
Programmable for Instant, Delay with Warning and/or Alarm
-
Momentary or Holding Contact for the Exit Delay
-
Input Sensing Terminals:
a) Door position, b) Egress, c) O/P 1 inhibit
-
Output Control Terminals:
Transistor Open Collector 24VDC/100mA sink Max for the following outputs
a) Duress, b) Alarm, c) Key Active, d) Output 3 (Door Bell version only), e) Inter-lock
-
Output Relay 2 – N.C. & N.O. dry contacts, 1A/24VDC Max.
-
Output Relay 3 – N.C. & N.O. dry contacts, 1A/24VDC Max. (N.O. contact only for Door Bell version)
-
Tamper Switch – N.C. dry contact, 50mA/24VDC Max.
-
Dimensions:
DOLKPL1K B/ B – 6.14(H) X 4.05(W) X 1.9/2.7(D)inches
-
Weight:
DOLKPL1KB A / B – 1.03Kg net
-
Housing:
DOLKPL1KB A / B – Anodized steel, powder paint coating outer box & plastic inner box
-
Faceplate Material:
.05 inches stainless steel
|
