|
Apollo BA12T Barrier Arm Operator -- $ No longer available
Apollo Operators are 12 Volt DC (Direct Current) powered. A 12 Volt sealed battery (33 ampere hour minimum) is recommended. There are several advantages with 12 Volt DC systems:
• Low voltage virtually eliminates risk of electrical shock.
• Battery powered operators can provide up to 200 operations in the event of power outages.
• The battery may be recharged with a trickle charger or by solar energy (eliminating the need for costly trenching to remote entrances).
•Wireless (Solar Rechargeable Battery)
•Runs on 12 volts DC
•Adapts to wood, aluminum, or PVC arms
•Operates PVC Arms up to 10 feet
•Handles wood arms up to 16 feet (with counterweight)
•Replacement arms are low cost and easy to change
•Continuous operation
•Battery (not included) rechargeable with solar or electrical battery chargers
•Cover is key lock secured
•All internal steel parts are zinced
•Cover and pedestal are powder coated
•Smooth mechanical soft start and stop operation
•Uses the Apollo 800 series circuit board
•No limit adjustments necessary
•Two-year warranty
Supply Voltage:
12 VDC
Recommended Battery: 33aH Sealed Lead Acid
Battery Charger: 1.5 amp - up to 80 cycles/day
10 amp - continuous duty (or over 80 cycles/day)
Recommended Solar Panel: Refer to Chart
Duty Cycle: Continuous
Operating Temperature: –40°F - +150°F
Current Draw Standby: 10mA
Current Draw Operating: 2A
Arm Capacity without counter weight: 10 ft., 8 lbs. max
Arm Capacity with counter weight: 16 ft., 12 lbs. max
Recommended Arm Material (not supplied): 1”x4” light wood (16 ft. max)
PVC (10 ft. max)
Aluminum (.050 wall thickness) 16 ft. max
Counter Weight (optional): 20 lbs. Steel
|
