FAAC 746 Electric Slide Gate Openers - FAAC 746 Light Commercial Opener
FAAC 746 Slide Gate Openers
The FAAC 746 Compact Slide Gate Opener uses GentleSlidetm Motion Management to
slide gates with a pulling force of up to 35 lb (16 kg). This operator is available in two
basic versions, the rack and pinion or the chain version. It comes as a package
containing the drive unit and factory-wired electronic control panel inside the top cover
of the unit. All external reversing devices and other accessories must be ordered
separately. The control panel provides power for gate accessories of 24 VDC (pulsed
or constant). The maximum recommended amperage draw for accessories should not
exceed 360 milliamps.
Note: The Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
Compatible photo cell More Information here
FAAC 746 Chain Gate Operator - Includes 230 VAC Operator 780D Control Panel, 16 or 20 tooth sprocket, protective cover, limit switch plates, mounting angle brackets, chain-to-gate mounting hardware with nickel plated master links, warning signs. (Chain is not Included)" -- $1,068.50
FAAC 746 Rack and Pinion Operator (Rack Not Included) - Includes 230 VAC Operator, 780D Control Panel, 20 tooth pinion, mounting angle brackets and limit switch plates." -- $1,068.50
FAAC 746 Commercial Slide Gate Openers
FAAC MODEL 746 is designed for residential and light duty commercial applications.
Available in chain and rack&pinion versions. 1/2 HP motor features Gentle Slide™ Motion
Management. Model 746 has 2 year limited warranty.
FAAC MODEL 746 CHAIN KITS INCLUDE:
Operator, Control Panel, Sprocket Idlers and protective cover Easy install limit switch
plates Mounting angle brackets chain-to-gate mounting hardware with nickel plated
master links Chain is not included (Installation kits available)
FAAC MODEL 746 RACK & PINION KITS INCLUDE:
Operator, Control Panel, Pinion Mounting angle brackets Limit switch plates Rack is not
included (Installation Kits available)
* 230 VAC
* External limits
* Manual release (non-keyed)
* "Soft Stop” on opening and closing
*3/4 hp motor
* Oil immersed clutch which, when properly adjusted, limits the amount of pressure the
operator can apply to moving the gate.
* Duty Cycle: 30% motor run time
* Choose from 4 operating modes:
* signal to open, signal to close
* automatic logic
* security logic
* S2 security logic